Using The Drive - IBM 40/80 GB HH DLTVS User Manual

Using the drive

This illustration shows the front panel of the 40/80 GB DLTVS Tape Drive
installed in an external enclosure.
1 External power LED
4 Clean/media LED
Front Panel LEDs
The following table describes the LED (light emitting diode) indicators on the
drive front panel.
Indicator
Drive Error
Ready (Green)
1-10
40/80 GB HH DLTVS Internal Tape Drive: User's Guide
2 Drive error LED
5 Cartridge door
State
Blinking
Off
On
Off
Blinking (constant period &
duty cycle)
Blinking (dual period &
duty cycle).
3 Ready LED
6 Unload button
Operating condition
There is an unrecoverable
hard drive error or a POST
error. Refer to the
Troubleshooting section in
Chapter 2.
No drive errors.
Power to the drive.
No power to the drive.
Tape is in motion.
Reserved for future use.