Storing Speed-Dial Numbers - Brother MFC-8440 User Manual

4
Enter a number (up to 20 digits).
Set
Press
■
If you want to enter a pause in the dialing sequence (for
example, to access an outside line), press
you are entering the digits.
Each key press of
when the number is dialed, and a dash appears on the screen.
5
Use the dial pad to enter the name (up to 15 characters).
Set
Press
(You can use the chart on page 4-3 to help you enter letters.)
—OR—
Set
Press
6
Go to Step 2 to store another One-Touch number
—OR—
Stop/Exit
Press
When you dial an auto dial number, the LCD shows the name
and number you've stored, or, if you haven't stored a name, only
the number you've stored.

Storing Speed-Dial numbers

You can store Speed-Dial numbers, so that when you dial you will only
have to press a few keys (
Start
number, and
numbers and the MFC-8440/8840D/8840DN can store 300
Speed-Dial numbers.
1
Menu
Press
2
Use the dial pad to enter a
three-digit Speed-Dial number
(001-200 for MFC-8640D, 001-300
for MFC-8440/8840D/8840DN).
(For example, press
Set
Press
If you have not installed the optional LAN board (NC-9100h), go
to Step 4.
—OR—
If you are using the MFC-8840DN or have installed the optional
LAN board (NC-9100h), the MFC will ask you if the Speed-Dial
is for a fax/telephone number or an e-mail address. Go to Step 3.
Downloaded from ManualsPrinter.com Manuals
7 - 2 AUTO DIAL NUMBERS AND DIALING OPTIONS
.
Redial/Pause
.
to store the number without a name.
.
Search/Speed Dial
). The MFC-8640D can store 200 Speed-Dial
2 3 2
, , , .
005
.)
.
Redial/Pause
enters a 3.5 second pause
#
, , the three-digit
23.Set Auto Dial
2.Speed-Dial
Speed-Dial? #
Enter & Set Key
as