Temporary copy settings
You can improve your copies by using the Temporary Copy Keys:
Enlarge/Reduce
N in 1
(For MFC-8440) or
MFC-8840D and MFC-8840DN). These settings are temporary, and
the MFC returns to Fax mode 1 minute after it finishes copying. If you
want to use these temporary settings again, place the next original in
the ADF or on the scanner glass within that time. However, if you
have set the Mode Timer for Copy and Scan modes to 0 to 30
seconds, the MFC returns to the default settings after the number of
seconds that has been set for Mode Timer. (See Setting the Mode
Timer on page 4-5 and see Using the copy keys (Temporary
settings) on page 10-6.)
Temporary Copy Keys
While the MFC is copying, incoming faxes will be received into
the memory instead of being printed.
Downloaded from ManualsPrinter.com Manuals
10 - 2 MAKING COPIES
Contrast
Quality
,
,
Duplex/N in 1
Tray Select
,
,
(For MFC-8640D,
Sort
and