Olympus Stylus Tough 8010 Instruction Manual page 32

Sequential shooting (Drive)
Pictures are taken sequentially while the shutter
button is held down.
1
Select the drive option in the
shooting function menu.
Option
o
j
*1
W
The shooting speed varies depending on the
*1
settings for [IMAGE SIZE/COMPRESSION] (p. 33).
When set to [j], the fl ash (p. 28) cannot
be set to [REDEYE]. In addition, when set to
[W] the fl ash is fi xed to [FLASH OFF].
When set to [W], [IMAGE SIZE] is limited
to [3] or lower, and the ISO sensitivity is
fi xed to [ISO AUTO].
32 EN
SEQUENTIAL SEQUENTIAL
Description
One frame is shot each time the
shutter button is pressed.
Take sequential shots using the
focus, brightness (exposure) and
white balance set in the fi rst frame.
The camera takes sequential shots
at a faster speed than in [j].
Using the LED illuminator
(STYLUS TOUGH-8010/μ TOUGH-8010 and
STYLUS TOUGH-6020/μ TOUGH-6020 only)
In a dark location, the LED illuminator can
be used as an auxiliary light to see things or
compose shots.
P P
1
Set [LED ILLUMINATOR] (p. 52) to
[ON].
2
0.0 0.0
Press and hold F down until the
WB WB
AUTO AUTO
LED illuminator lights up.
ISO ISO
AUTO AUTO
●
If you perform an operation when the LED
illuminator is on, it will illuminate up to approx. 90
seconds.
LED
illuminator
The LED illuminator turns off if no operation
is performed for approx. 30 seconds.
Even when the camera's power is turned
off, if F is pressed until the LED illuminator
lights up, it lights for 30 seconds.
To turn the LED illuminator off
Press and hold F down, until the LED
illuminator turns off.