Shooting Tips - Olympus Stylus Tough 8010 Instruction Manual

Olympus digital camera user manual
Table of Contents

Advertisement

Shooting tips

When you are unsure of how to take a picture
that you envision, refer to the information below.
Focusing
"Focusing on the subject"
Taking a picture of a subject not in the center
of the screen
After focusing on an object at the same distance
as the subject, compose the shot, and take the
picture.
Pressing the shutter button halfway (p. 16)
Set [AF MODE] (p. 34) to [FACE/iESP]
Taking a picture in [AF TRACKING] mode
(p. 34)
The camera tracks the subject movement
automatically to focus on it continuously.
Taking a picture of subjects where autofocus
is diffi cult
In the following cases, after focusing on an object
(by pressing the shutter button halfway down) with
high contrast at the same distance as the subject,
compose the shot, and take the picture.
Subjects with low contrast
When extremely bright objects
appear in the center of the
Object with no vertical lines
It is also effective to compose the shot by holding the
*1
camera vertically to focus, and then returning to the
horizontal position to take the picture.
When objects are at different
60 EN
screen
*1
distances
Fast-moving object
The subject is not in the center
of the frame
Camera shake
"Taking pictures without camera shake"
Taking pictures using [IMAGE STABILIZER]
(p. 36)
When a picture is taken of a shadowy subject, the
CCD
shifts to correct for camera shake even if
*1
the ISO speed is not increased. This function is
also effective when taking pictures at a high zoom
magnifi cation.
A device that takes light received through the
*1
lens and converts it into electric signals.
Shooting movies using [IS MOVIE MODE]
(p. 36)
Select C (SPORT) in the scene mode (p. 24)
The C (SPORT) mode uses a fast shutter speed
and can reduce the blur incurred by a moving
subject.
Taking pictures at a high ISO sensitivity
If a high ISO sensitivity is selected, pictures can
be taken at a high shutter speed even at locations
where a fl ash cannot be used.
"Selecting the ISO sensitivity" (p. 31)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents