Advertisement
HINT: If your vehicle was Two Wheels Driving Type, see the next page
please.
10
1. Slide the gear box onto the rear axle (Left Side). "R" labeled gear box should be fit to
the "R" side of vehicle body; "L" labeled gear box should be fit to "L" side of vehicle
body.
2. Slide the driving wheel onto the rear axle. And keep the driving wheel match with the
gear box.
3. Slide the Ø10 Washer onto the rear axle.
4. Tighten a Ø10 Locknut to the end of the rear axle with a spanner.
Tools required: Spanner
5. Slide the Ø10 Washer onto the rear axle (Right Side).
6. Slide the Bushing(ring end first) onto the rear axle .
7. Slide the Normal wheel onto the rear axle. And keep it match with the Bushing.
8. Slide the Ø10 Washer onto the rear axle.
9. Tighten a Ø10 Locknut to the end of the rear axle with a spanner.
10. Fit a hubcap to the wheel cover. Repeat for the other side.
1WD
Attach the Rear Wheels │ 8
3
4
2
5
1
6
Rear axle
8
9
7
10
Advertisement
