Advertisement
Normal type
HINT: If your vehicle equipped with Remote Control Function, see the
next page please!
Hole in the
front axle linkage
Turn the vehicle body on its side.
1. Slide a Ø10 washer onto the steering column from the straight end.
2. Insert the straight end of steering column up through the hole at the front of
vehicle body from bottom side, and out through the hole in the dash.
3. Insert the bent end of steering column through the hole in the front axle
linkage.
4. Fit a Ø10 washer onto the steering column.
5. Insert a split pin into the hole in the steering column, bend the ends of split pin
back using a
Attach the Steering Column │ 11
4
3
long nose pliers.
Steering Gear Box
1
2
Advertisement
