Ø10 Washer - PlayActive MINI Hatch Owner's Manual

2WD
9
1. Slide the gear box onto the rear axle (Left Side). "R" labeled gear box should be fit to
the "R" side of vehicle body; "L" labeled gear box should be fit to "L" side of vehicle
body.
2. Slide the driving wheel onto the rear axle. And keep the driving wheel match with the
gear box.
3. Slide the Ø10 Washer onto the rear axle.
4. Tighten a Ø10 Locknut to the end of the rear axle with a spanner.
Tools required: Spanner
5. Slide the gear box onto the rear axle (Right Side). "R" labeled gear box should be fit to
the "R" side of vehicle body; "L" labeled gear box should be fit to "L" side of vehicle
body.
6. Slide the driving wheel onto the rear axle. And keep the driving wheel match with the
gear box.
7. Slide the Ø10 Washer onto the rear axle.
8. Tighten a Ø10 Locknut to the end of the rear axle with a spanner.
9. Fit the hubcaps to the wheel cover. Repeat for the other side.
Attach the Rear Wheels │ 9
3
4
2
1
5
6
Rear axle
7
8
9