Olympus SP-800UZ Instruction Manual page 32

Selecting the method for measuring
the brightness [ESP/n]
I (Shooting menu 1)
Available shooting modes:P M s P
Submenu 2
ESP
5 (spot)
E
(center
weighted)
When set to [ESP], the center may
appear dark when shooting against strong
backlighting.
[ 5 (spot)] can be selected when [SHADOW
ADJUST] is set to [OFF], or when [AF
MODE] is set to [SPOT].
32 EN
ESP/n
A Q
Application
Shoots to obtain a balanced
brightness over the entire screen
(Meters the brightness at the
center and surrounding areas of
the screen separately).
Shoots the subject at the center
during backlighting (Meters the
brightness at the center of the
screen).
Shoots without being affected
by the surrounding brightness.
(Meters a wide range based on the
center section of the screen.)
Shooting at higher magnifi cations than
optical zoom without reducing the
image quality [FINE ZOOM]
I (Shooting menu 1)
Available shooting modes:P M s P
Submenu 2
Optical zoom is used to zoom in
OFF
for shooting.
Optical zoom and image cropping
ON
are combined to zoom in for
shooting. (Approx. 201x (max.))
This function will not reduce the image
quality since it dose not convert the data
with fewer pixels into the data with larger
pixels.
When set to [ON], [IMAGE SIZE] is limited
to [4] or lower.
The setting is not available when [DIGITAL
ZOOM] is set to [ON].
[FINE ZOOM] is not available when
[a SUPER MACRO] (p. 26) is selected.
Shooting at higher magnifi cations than
optical zoom [DIGITAL ZOOM]
I (Shooting menu 1)
Available shooting modes:P M s P
Submenu 2
Only optical zoom is used to zoom
OFF
in for shooting.
Optical zoom and digital zoom
ON are combined to zoom in for
shooting.(Approx. 150x (max.))
The setting is not available when [FINE
ZOOM] is set to [ON].
[DIGITAL ZOOM] is not available when
[a SUPER MACRO] (p. 26) is selected.
FINE ZOOM
A Q
Application
DIGITAL ZOOM
A Q
Application