Olympus SP-800UZ Instruction Manual page 31

Brightening the subject against
backlight [SHADOW ADJUST]
I (Shooting menu 1)
Available shooting modes:P M s P
Submenu 2
The shadow adjustment effect is
AUTO applied when shooting against
backlight.
OFF
The effect is not applied.
Shoot with automatic adjustment
ON
to brighten an area that has
become darker.
When set to [ON], [ESP/n] (p. 32) is
automatically fi xed to [ESP].
Selecting the focusing area [AF MODE]
I (Shooting menu 1)
Available shooting modes:P M s P
Submenu 2
The camera focuses automatically.
(If a face is detected, it is shown
by a white frame
shutter button is pressed halfway
*1
FACE/iESP
and the camera focuses, the
frame turns to green
detected, the camera chooses a
subject in the frame and focuses
automatically.)
The camera focuses on the
SPOT
subject located within the AF
target mark.
The camera tracks the subject
AF TRACKING movement automatically to focus
on it continuously.
The AF target mark position is
moved to focus the camera on the
AREA
subject located at a position other
than the center.
*1 For some subjects, the frame may not appear or
may take some time to appear.
If the frame blinks in red, the camera cannot focus.
*2
Try refocusing on the subject.
For information on using the menus, see "Using the Menu" (p. 4).
SHADOW ADJUST
A Q
Application
AF MODE
A Q
Application
; when the
*1
. If no face is
*2
To focus on a moving subject
continuously (AF Tracking)
1 Hold the camera to align the AF target
mark on the subject and press the
A button.
2 When the camera recognizes the subject,
the AF target mark automatically tracks
the subject movement to focus on it
continuously.
3 To cancel the tracking, press the
A button.
Depending on the subjects or the shooting
conditions, the camera may be unable to
lock the focus or fail to track the subject
movement.
When the camera fails to track the subject
movement, the AF target mark changes to
red.
When set to [ON], [ESP/n] (p. 32) is
automatically fi xed to [ESP].
To move and lock the AF target mark
[AREA]
Use FGHI to move the AF target mark
(V) on the screen. To lock the AF target
mark, press and hold the A button until the
mark changes to R. To unlock the AF target
mark, press and hold the A button until the
mark changes to V.
EN 31