Remote Control Doesn't Operate 1. Check the batteries in the remote control aren't flat. 2. The infra red remote control must be pointed directly at the TTS-11 Wall Thermostat plaque in order for its signal to be received. 3. If there is no light or beep from the wall plaque when the remote controls buttons are pressed, consult your installer to ensure the wall plaque has been set up correctly for remote control use.
Your temperzone air conditioner is supplied with a TTS-11 Wall Thermostat. 1. Check there is power to the air conditioner. There is no power if the TTS-11's This thermostat has been designed to maintain a high level of comfort for room screen is blank.
Flip open the door on the remote control to reveal additional function buttons. SWING Press to activate or deactivate the air louvre AUTO SLEEP sweep function. SWING KEY LOCK DRY AUTO COOLHEATFAN (NB This function is only applicable to MON TUE WED THU FRI SAT SUN systems with underceiling indoor units).
Press [FAN] button to select Auto, High, Medium or Low speed. Under Dry mode, fan speed will be Auto – The TTS-11 will automatically select the most suitable fan speed to inhibited and will not be displayed. maintain the set temperature.
Page 6
External Time Clock If the TTS-11 is to be connected to an external time clock, ensure the 7-day timer is not activated, i.e. 'TIMER ACTIVE' is not displayed. Note: The TTS-11's battery life is reduced when using an external time clock.
Need help?
Do you have a question about the TTS-11 and is the answer not in the manual?
Questions and answers