The Control Of Throttle Valve Handle; Parking Method - Sym HU05 Series Instruction Manual

7. Use of Each Component

THE CONTROL OF THROTTLE VALVE HANDLE

Deceleration

PARKING METHOD

When approaching the parking lot：
1. Turn on the turn signal light early, and pay attention to the vehicles in front, from rear, left and right,
then take the inner lane and approach slowly.
2. Return the throttle valve handle back to its original position, and apply brakes in advance. (Brake
light comes on when braking to warn riders of vehicles behind.)
When stop completely：
3. Press the turn signal switch back to its original position, and turn the ignition switch key to "
position to shut off the engine.
4. Get off the scooter from left side after the engine has been stopped, and select a parking place
where the scooter will not interfere with traffic and the ground is level, then put down scooter's
main parking stand.
5. Hold the steering handle with your left hand, and hold down the front end of seat or hold the
parking handle on the lower-left side of seat with your right hand.
6. Press the main parking stand with your right foot, put down the main parking stand firmly on the
ground.
To remind you： Lock the steering handle and remove the key after parking to prevent the scooter
CAUTION：
Park your scooter at a safe place where it will not interfere with traffic.
Acceleration
from being stolen.
Acceleration：To increase speed.
When riding on an inclined road, turn the throttle
valve handle slowly to allow the engine to output
its power.
Deceleration：To decrease speed.
12
"