Selecting The Metering Method - Olympus CAMEDIA E 10 Instructions Manual

Selecting the Metering Method

Select the method to meter the brightness of the subject. Three metering methods are
available: digital ESP metering, center weighted averaging metering, and spot metering.
The camera is set for digital ESP metering when you purchased the camera.
Digital ESP metering
Meters the entire picture and
reads not only the light but the
brightness patterns as well to
determine the correct exposure
value.
1
Brightness of center and surrounding area different?
When there is a great difference in the level of brightness between the center of the picture and the
surrounding area, or when there is an object in the background brightly lit, digital ESP metering may
not be able to meter the scene correctly. In such a situation, switch to center weighted averaging
metering or spot metering, cover the subject with the metering mark and adjust the exposure
compensation and other settings to determine the correct exposure. For a dark subject in strong
backlighting, you can also use the flash.
78
Center
Center weighted
weighted
averaging
averaging
metering area
metering
Meters the entire picture, yet
concentrates on metering light
in the center of the picture in
area three times the size of
the Spot metering area mark
(approximately 11% of the
viewfinder) to determine the
correct exposure value.
1
Digital ESP metering
Center weighted averaging metering
Spot metering
2
Spot metering
Concentrates on metering the
light on the area covered by
the spot meter in the center of
the viewfinder (1.2% of the
viewfinder) to determine the
correct exposure value.
While holding down the metering
mode button on the top, left
side of the camera, turn the main
dial or sub dial until you see the
desired metering setting displayed
in the viewfinder or monitor.
Viewfinder display
Take the picutre.
Spot metering
area mark
Control panel