Displaying The Histogram - Olympus CAMEDIA E 10 Instructions Manual

Displaying the Histogram

A histogram can display the distribution of brightness of the image displayed for
playback. The histogram feature is switched on with a menu selection.
Switching the histogram display on and off
Follow this procedure to switch the histogram display on or off.
3
4
108
1
OFF
ON
2
5
6
1
Set the mode dial to the setup/
connection mode mark
2
Press the menu button
The menu opens in the monitor.
3
On the arrow pad, press
to move the green highlight to the
histogram mark
4
On the arrow pad, press
move the green highlight to the
right.
5
On the arrow pad, press
move the green highlight to ON.
If you want to switch off the histogram, just
leave OFF selected.
6
Press the
setting.
The green highlight returns to the
histogram mark
Press button again to close the menu.
Note
• If the camera is connected to a computer with
a USB cable, the menu is not displayed.
Disconnect the USB cable from the camera.
.
.
or
.
to
to
button to select the
.