Using An Optional Conversion Lens - Olympus CAMEDIA E 10 Instructions Manual

Using an Optional Conversion Lens

The conversion lenses listed below can be attached to this camera. When you use a
conversion lens, set the zoom setting (TELE or WIDE) on the camera and make sure
that the mark is displayed in the control panel. With the
camera can use the correct methods to set the focus and exposure for the conversion
lens. If you attempt to use a conversion lens with the camera without the
displayed, the camera may not be able to set the correct focus and exposure.
The following conversion lenses can be used with this camera.
Conversion Lens
Type
3x Extension Lens Tele 300 Pro
1.45x Tele Extension Lens Pro
0.8x Wide Extension Lens Pro
Macro Extension Lens Pro
Possible to shoot area up
Note
• Using the built-in flash could cause shadows in the image and should not be used.
• If you use a thick filter, such as a PL filter, or combinations of filters, the areas around the
circumference of the image could become dark. Filters can be attached to the camera, but the
results of shooting with a filter cannot be guaranteed.
TCON-300
F2.8
f=420mm equivalent
Filter diameter 49mm
Complete Multi-Coat
TCON-14B
F2.4
f=200mm equivalent
Filter diameter 86mm
Complete Multi-Coat
WCON-08B
f=28mm equivalent
Filter diameter 105mm
Complete Multi-Coat
MCON-35
F2~F2.4
to size of a business card
Filter diameter 72mm
Complete Multi-Coat
Zoom
Attachment
Setting
Method
Support
arm
TELE
Screw TELE
F2
Screw WIDE
Screw WIDE~TELE
mark displayed, the
mark
Control Panel
Display
flashing
illuminated
8
133