Setting The Idle Time For The Sleep Mode - Olympus CAMEDIA E 10 Instructions Manual

Setting the Idle Time for the Sleep Mode

When the camera is set in the P, A, S, or M shooting mode, if it remains idle for a
specified length of time, it will enter the sleep mode automatically and switch off the
monitor, control panel, and viewfinder displays to conserve the batteries. To restore the
camera to full operation, just half-press the shutter button or any other button. If the
camera remains idle in the sleep mode for 1 hour, then the camera will switch itself off.
If the camera remains idle with the mode dial set to Playback
camera will switch itself off after a specified length of time has elapsed.
Shooting Mode (P, A, S, M)
Camera never enters sleep mode.
OFF
Camera neither enters sleep mode, nor switches itself off.
Camera enters sleep mode if
1MIN
it remains idle for 1 minute.
Camera enters sleep mode if it
2MIN
remains idle for 2 minutes.
Camera enters sleep mode if it
5MIN
remains idle for 5 minutes.
Camera enters sleep mode if it
10MIN
remains idle for 10 minutes.
Once the camera has switched itself off, you must switch it off and on again to restore
full operation.
Note
• After the camera enters the sleep mode, monitor and control panel go off. If the mode dial is set to
setup/connection mode mark
sleep mode setting and not switch itself off, regardless of how long it remains idle.
128
Playback
Print Reserve Mode
Power switches off after 1
minute.
Power switches off after 2
minutes.
Power switches off after 5
minutes.
Power switches off after 10
minutes.
or with the AC adapter connected, the camera will ignore the
or Print Reserve
, Setup/ Connection
Mode
Camera neither
enters sleep mode,
nor switches itself off.
, the