If The Card Is Not Recognized (Card Check) - Olympus C-150 Quick Start Manual

If the card is not recognized (card check)

When the power is turned on, the camera checks the card automatically. If
there is no card in the camera or a card that is not supported by this camera
is inserted, the following screen is displayed.
• All data stored on the card is erased when the card is formatted.
Note
Monitor indication
NO CARD
CARD SETUP CARD SETUP
POWER OFF
FORMAT FORMAT
SELECT SELECT GO GO
Corrective action
There is no card in the camera or the card is not
inserted properly.
T Turn off the camera, then insert a card. If a card
is already inserted, remove it and insert it again
correctly.
The card cannot record, play back or erase
pictures.
T Replace the card with a new one.
Ññ
Press to select POWER OFF, then press
.
T Format the card.
Ññ
Press to select
to display the confirmation screen.
Select YES and press
Formatting starts. If the card was successfully
formatted, the camera is ready to take pictures.
Power on/off
FORMAT, then press
.
1
23