Settings You Can Change With User Tools; General Features - Gestetner mp161spf Operating Instructions Manual

Settings You Can Change with User Tools

Reference
To access User Tools, see p.21 "Accessing User Tools ( System Settings )".

General Features

❖ Panel Key Sound
The beeper (key tone) sounds when a key is pressed.
Note
❒ Default: On
❖ Copy Count Display
The copy counter can be set to show the number of copies made (count up),
or the number of copies yet to be made (count down).
Note
❒ Default: Up (count up)
❖ Function Priority
You can specify the mode to be displayed immediately after the operation
switch is turned on, or when System Reset mode is turned on.
Note
❒ Default: Copier
❖ Print Priority
Set the print priority for each mode.
Reference
p.18 "Multi-Access"
Note
❒ Default: Display mode
❒ When [Interleave] is selected, the current print job will be interrupted after
a maximum of five sheets.
❖ Display Contrast
You can adjust the brightness of the display.
❖ Key Repeat
You can select whether or not to use the key repeat function.
Note
❒ Default: On
Downloaded from ManualsPrinter.com Manuals
Settings You Can Change with User Tools
3
23