Accessing User Tools ( System Settings ); Changing Default Settings - Gestetner mp161spf Operating Instructions Manual

Accessing User Tools ( System Settings )

This section is for key operators in
charge of this machine.
User Tools allow you to change or set
defaults.
Note
❒ Operations for system settings dif-
fer from normal operations. Al-
ways quit User Tools when you
have finished. See p.22 "Quitting
User Tools".
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the {Clear
Modes} key is pressed.

Changing Default Settings

Note
❒ If a key operator code is already
set, the key operator code entry
display appears. Enter the key op-
erator code, and then press the
{OK} key. See p.27 "Key Operator
Code".
A
Press the {User Tools/Counter} key.
Downloaded from ManualsPrinter.com Manuals
Accessing User Tools ( System Settings )
B
Select [System Settings] using {U}
or {T}, and then press the {OK}
key.
C
Select the menu using {U} or {T},
and then press the {OK} key.
Reference
p.19 "User Tools Menu ( Sys-
tem Settings )".
D
Select the item using {U} or {T },
and then press the {OK} key.
E
Change settings by following in-
structions on the display, and
then press the {OK} key.
Note
❒ To cancel changes made to set-
tings and return to the initial
d i s p l a y , p r e s s t h e { U s e r
Tools/Counter} key.
ARK004S
3
21