36
PRE-OPERATING PREPARATIONS
ENOM00039-0
5. Warning system
If outboard motor encounters an abnormal
condition of fault, the warning horn will
emit a continuous beep or intermittent
short beeps and the warning lamp (LED)
will synchronize with the horn and engine
speed will be limited (engine will not be
stopped).
See next page for conditions which will
lead to an abnormal condition or fault.
ENOM00040-B
Location of warning horn and
6
lamp
Warning horn
RC model: Located inside the remote con-
trol.
Tiller handle model (Oil auto mixing type
only): Located inside of the top cowl.
Warning lamp (LED)
RC model: Located in the tachometer.
Tiller handle model (Oil auto mixing type
only): Located on the bottom cowl.
1. Warning lamp
1. Pilot lamp
1
ENOF00851-A
1
ENOF01957-0