1. Manuals
  2. Brands
  3. Zeagle Manuals
  4. Diving Instrument
  5. Flathead VI
  6. Owner's manual

Zeagle Flathead VI Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Flathead VI Owner's
Manual

Advertisement

Table of Contents
loading

Related Manuals for Zeagle Flathead VI

Summary of Contents for Zeagle Flathead VI

  • Page 1 Flathead VI Owner’s Manual...
  • Page 2 It may also be used to alert against unsafe practices. Note to European Customers: The Zeagle Flathead-VI regulator is rated for operating temperatures above 10° C. EN250:2000 Certification extends to 50 m.

  • Page 3: Table Of Contents

    Pages Table of Contents: Introduction – Safety Information Lifetime Warranty Disclaimer and Limitation of Remedy Cold Water Diving Nitrox Use / First Stages Dry Environmental Sealing / Second Stage Features Resistance Control Knob / Dive/Pre-Dive Venturi Lever Octopus Use / Pre-Dive Check Post-Dive Care Maintenance Code Of The Responsible Diver...

  • Page 4: Safety Information

    Congratulations on your Zeagle Regulator purchase! Your new Zeagle Flathead VI Regulator has been designed and manufactured to the highest possible standards of performance and reliability. With the reasonable care outlined in this manual it will provide you with many years of diving enjoyment. Along with all the...

  • Page 5: Lifetime Warranty

    Under this limited warranty, Zeagle will either repair or replace, at its sole option, any original equipment or parts that fail to perform as intended. Shipping and Labor charges are not included and must be paid by you.

  • Page 6: Disclaimer And Limitation Of Remedy

    This limited warranty applies only to the original purchaser, and then only to certified divers. 5. Sometimes products from other manufacturers are attached to Zeagle equipment. This warranty does not cover those other products or make any claims as to the performance or suitability of those other products.
  • Page 7 Scuba training agency. 2. Zeagle regulators must be serviced only by dealers or technicians trained and authorized to service Zeagle equipment. At no time should any unauthorized person attempt to repair the regulator or adjust any nuts, bolts or screws other than those used to mount the regulator to, or dismount it from the tank valve.

  • Page 8: Cold Water Diving

    CAUTION The high-pressure outlets (HP Ports) are distinctly larger than the low-pressure outlets. Only devices with fittings, hoses, and components designed for the full tank pressure that the regulator will be mounted on, such as Submersible Pressure Gauges, are to be installed in these ports.

  • Page 9: Nitrox Use / First Stages

    FIRST STAGES The first stage reduces the high pressure air contained in the cylinder to a constant intermediate pressure of approximately 135 p.s.i. (9.2 BAR). Zeagle first stages are designed to do this with outstanding reliability.

  • Page 10: Dry Environmental Sealing / Second Stage

    DIN 477 connector for cylinders utilizing a DIN valve (fig. 4). Zeagle offers a DIN to Yoke Converter p/n 330-0001 (fig. 5) that allows DIN fitted regulators to be converted for use with a “post” type valve in a few seconds without using tools.

  • Page 11: Resistance Control Knob / Dive/Pre-Dive Venturi Lever

    “ + ” Position Position NOTE: Ask your authorized Zeagle Scuba dealer for in-store instructions and training on the use of the second stage Resistance Control Knob and lever. Your dealer will show you how to make adjustments to get the desired breathing results.

  • Page 12: Octopus Use / Pre-Dive Check

    OCTOPUS (Alternate Second Stage) USE The diver controls available on Zeagle second stages make them an excel- lent choice for Octopus use. An Octopus Regulator is often subjected to conditions that may cause a free-flow. To minimize this turn the Resistance Control Knob most of the way in (Clockwise) and move the Dive / Pre-Dive Lever forward to the “-”...

  • Page 13: Post-Dive Care

    If you hear any leaks, turn the tank valve off. Do not use the regulator until the source of the leak has been found and corrected by an autho- rized Zeagle Scuba service technician. Always mount the regulator on the valve with the clear diaphragm end (with the black logo showing underneath) pointed downwards.

  • Page 14: Maintenance

    MAINTENANCE It is essential that your regulator is checked at least annually by an autho- rized Zeagle regulator technician. Unusually heavy use, or use in dirty or contaminated water may result in the need for more frequent service. A service record has been provided at the end of this manual to assist you in keeping your regulator’s service up to date.

  • Page 15: Code Of The Responsible Diver

    The Code of the Responsible Diver • As a responsible diver I understand the risks I may encounter while diving. I will seek experience and knowledge from those with more and will share mine with those who have less. • “Superior divers use their superior knowledge to stay out of situa- tions that would require their superior skills.”...

  • Page 16: Specifications

    SPECIFICATIONS A. FIRST STAGE REGULATOR MODEL: Flathead VI FEATURES: High Efficiency Porting, Balanced Diaphragm, Dry Environmental Seal with Hydro Transmitter. Yoke or DIN inlet available. 2.18 lb. (.99 kg.) WEIGHT 120 -150 psi (8.27-10 INTERMEDIATE PRESSURE bar) # LOW PRESSURE PORTS 4 (3/8”-24 UNF)

  • Page 17: Service Record

    Service Record Date: Service: Date Purchased:...
  • Page 18 Notes: The date of purchase, dive store, and contact information at the store should be written on this page. A copy of the receipt could also be stapled to this page for future records.
  • Page 19 Phone: (813) 782-5568 Fax: (813) 782-5569 www.zeagle.com European Certification Information EC Type examination (Article 10) by: SGS United Kingdom Ltd., Weston-super-Mare, BS22 6WA, Notified Body Number 0120 Meets EN250:2000 Standards Revision A 04/04 © 2004 Zeagle Systems, Inc. p/n 175-1640...

Table of Contents