Table of Contents
Advertisement
W
HEN TO REPLACE THE TONER CARTRIDGE
PG L26
Replace the toner cartridge after Toner Low displays in the printer
Status Monitor. Also, the Error LED indicator slowly blinks when
toner is low. After Toner Low displays, the printer will print about
100 more pages then display Toner Empty and stop printing.
Printing will resume after a new toner cartridge has been
installed.
PG L26 S
PECIAL
When the toner is running low, TONER LOW is displayed in the
operator panel LCD. If printing continues without replacing the
toner cartridge, CHANGE TONER is displayed and printing is
cancelled. Printing will resume after a new toner cartridge has
been installed.
R
EPLACING THE TONER CARTRIDGE
It is recommended that you clean the LED array at the same time
as you change the toner cartridge.
The toner used in this printer is a very fine dry powder contained
in the toner cartridge.
Have a sheet of paper handy so that you have somewhere to
place the used cartridge while you install the new one.
Dispose of the old cartridge responsibly, inside the pack that the
new one came in. Follow any regulations, recommendations, etc.,
which may be in force concerning waste recycling.
If you do spill any toner powder, lightly brush it off. If this is not
enough, use a cool, damp cloth to remove any residue. Do not
use hot water, and never use solvents of any kind. They will make
stains permanent.
If you inhale any toner or get it in your eyes, drink a
little water or bathe your eyes liberally in cold water.
Seek medical attention immediately.
PG L26/PG L26 Special User's Guide – Consumables and maintenance > 73
WARNING!
Advertisement
Table of Contents
