Table of Contents
Advertisement
T
RANSPARENCIES AND ADHESIVE LABELS
The manufacturer of this printer recommends the following
guidelines when selecting transparencies and adhesive labels for
use in your printer:
>
Always manually feed single sheets using a Manual Feed
Tray.
>
Always use rear output.
>
Media must be designed for use in laser printers or
photocopiers and must be able to withstand 200°C for 0.1
sec.
>
Do not use media designed for use in colour laser printers
and
photocopiers.
>
Labels should cover entire carrier sheet.
>
Carrier sheet or adhesive must not be exposed to any part
of the printer.
PG L26/PG L26 Special User's Guide – Paper recommendations > 43
Advertisement
Table of Contents
