Chauvet 4BAR Flex Quick Reference Manual page 3

EN
Product
Description
Product Overview
AC Power
Power Linking
Fuse Replacement
Mounting
Product
Mounting
Diagram
The 4BAR™ Flex is an upgraded version of the 4BAR™ that provides
added flexibility for additional features. You can mount up to 4 additional
products to the top of the 4BAR™ Flex with the built-in Edison plugs. The
4BAR™ Flex contains 4 low-profile, individually focusable heads for total
room or stage coverage.
DMX In
LED Display
Left
This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
You can link up to 12 4BAR™ Flex units at 120 VAC and 21 units at 230 VAC.
To replace the fuse in the 4BAR™ Flex:
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Before mounting this product, read the Safety Notes.
Tilt adjustment
Tripod Adjustment Knob
DMX Out
Fuse Holder
Middle
Power Outputs for
Additional Products
Pod pan adjustment
Tripod insertion
3
4BAR™ Flex QRG
Light Adjustment Knob (x 4)
Power In
Right
Back Panel View