Table of Contents
Advertisement
DVR User M anual
Channel: Choose the set motion detection channel.
Enable: Means that the motion detection function is on.
Sensitivity: Choose from six options according to the sensitivity.
Region: Click setup and enter the set area. The area is divided into PAL16X12. Green block
means the current cursor area. Black block means the unfenced area. You can set the area as
follows, Drag the mouse and draw the area.
Picture 4.3 Region
Period: Trigger the motion detection signal in the set time section. You can set according to week or
set uniformly. Each day is divided into four time sections.■ means the set valid.
Picture 4.4 Set the time section
Interval: Only one alarm signal is turned on even when there are several motion detect signals in
27
Advertisement
Table of Contents
