Table of Contents
Advertisement
DVR User M anual
UPNP: UPNP protocol can auto port forward on the router, make sure UPNP is running on the
router before you use it.
Picture 4.20 UPnP Setup
Enable: Choose Enable to make sure all UPNP settings are available.
HTTP: Route will automatically distribute HTTP port for the device, when IE viewing, it needs
this port (eg. 60.12.9.26:66)
TCP: Router will automatically distribute TCP port for the device, when monitoring via CMS, it
needs this port.
Mobile Port: Router will automatically distribute Mobile Port for the device, during mobile
monitoring, it needs this port.
RTSP
Picture 4.21 RTSP Setup
Enable: This option is enabled by default.
Port: The default port is 554.
39
Advertisement
Table of Contents
