Table of Contents
Advertisement
DVR User M anual
Input the user name and password that ISP(Internet service provider)provides. After saving it reboot
your system. Then the DVR will build a network connection based on PPPoE. The IP address will
change into dynamic IP address after above operation is done.
Operation: After PPPoE dialing successfully looks up the IP address in the IP address filed. Then
use this IP address to access the DVR through user port.
NTP setup
Picture 4.15 NTP
The NTP server must be installed in the PC.
Server IP: Input the IP address of the installed NTP server.
Port: Default: 123. You can set the port according to the NTP server.
Update Period: The same with the NTP server check interval. Default: 10 minutes.
EMAIL setup
If the alarm is turned on send an email about the alarm information to the appointed address.
35
Advertisement
Table of Contents
