Name Of Parts - Oki T400 Setup Manual

Name of Parts

■
Front View
Operation switch
■
Top cover .................... Open this cover when you set the paper.
■
Power switch .............. Press this switch to turn ON/OFF the printer.
■
Paper check window ... To check the status of paper.
■
Front cover ................. Open this cover to refill or set DIP-SW.
■
Operation switch
• POWER .... When you turn on the power, the green light lights up. Refer to
• ERROR ..... When an error occurs, the red light turns ON. Refer to
• ONLINE ... When the green light is ON, the printer can receive data. When
• [ONLINE] button ... Press this button to stop receiving data. Resume by
• [FEED] button ........ When you press this button in the offline state, you
2
Top cover
Power switch
"Starting/Power".
"When error light is ON".
the light is OFF, the printer cannot receive.
pressing this button again. If this button is pressed
while printing, the printing is suspended. To resume
printing, press this button again.
can feed paper. If you turn on the power of the printer
while you keep pressing this button, you can print out
the printer status.
Paper check
window
Front cover