Oki T400 Setup Manual page 7

■
Top Cover Open
Head
Sensor
Platen roller
■
Paper holder ... When you use a roll paper, set the paper here. You can
■
Paper holder slide lever .. Press this lever to adjust the paper holder width.
■
Head ................ Open this part to refill paper.
■
Head Open/Close lever .. Press this to open the head.
■
Thermal head .... This is the printing area. Please keep this part clean.
■
Platen roller ...... This is the part that feeds paper. Please keep this part
■
Sensor ................ Paper travels over this.
■
Driver for darkness adjustment ... This is used to change the print darkness.
4
Thermal head
adjust the width according to the paper size.
clean.
Driver for darkness
adjustment
Head Open/Close lever
Paper holder
Paper holder
slide lever