Windows 95/98 And Windows Nt4; Installing The Usb Printer Driver - Oki PAGE 8p Plus Setup Manual

Windows 95/98 and Windows NT4

Your CD-ROM drive is assumed to be drive D. If this is
not the case, substitute the correct drive letter for your
system.
1 Ensure that all documents are saved and all Windows
applications are closed.
2 On the menu, choose
Start
3 When prompted for the file, enter
D:\SETUP.EXE
and click .
OK
4 Follow the on-screen instructions to add the driver for your
printer to your system.
When installation is complete, the new printer will be available
from within your Windows applications.
16
Run...

Installing the USB printer driver

The USB port capability can only be used with Windows
98.
Your CD-ROM drive is assumed to be drive D. If this is
not the case, substitute the correct drive letter for your
system.
1 Connect the printer and USB cable (see 'Connecting the
USB cable') to your computer.
2 Windows will report that it has detected New Hardware
(Unknown Device).
When prompted for a driver, insert the CD-ROM which
came with the printer.
3 Click , then select the CD-ROM drive to search for the
Next
printer driver and click
4 The printer setup program will now start automatically.
If you do not run the setup program at this stage, you
can launch it later by selecting
and when prompted for the file entering
and clicking
D:\SETUP.EXE
5 During the installation process, you will be prompted to
choose a port to use with the printer. Select the USB port
that the printer is connected to, for example "OP1USB1".
again.
Next
on the
Run... Start
.
OK
OKIPAGE 8p Plus
menu