Table of Contents
Advertisement
DEFAULT SPEED
Adjusts the L/R scan speed. The speed range is adjustable from 1 to 64.
Procedure:
1.
Call preset point 95 to enter the main menu.
2.
Move cursor to choose [PANTILT SETTING] choose [AUTOSCAN SETUP] and press
[OPEN] to confirm the selection to enter scan function set item.
3.
Under [AUTOSCAN SETUP] choose [DEFAULT SPEED] item and press [OPEN] to confirm
the selection to enter default scan speed set item.
4.
Up/down P/T to change speed value, the speed can be set from 1 to 64.
5.
Press the [OPEN] key to save and exit. Press the [CLOSE] key to exit directly without saving.
HOME ACTION
If the camera does not receive any commands for a set time, it can perform a specific action set on
this screen. The time can be set from 5 to 255 and the action to perform can be to call any of the 200
presets, 4 sequences, 4 scans or 4 patterns.
PANTILT SETTING
【PANTILT SETTING】
【PRESETS SETUP】
【SEQUENCE SETUP】
【PRESETS SETUP】
【AUTOSCAN SETUP】
→【HOME ACTION】
HOME TIME
Procedure:
1.
Call preset point 95 to enter the main menu.
2.
Use the Up/down cursor to choose [PANTILT SETTING] choose [HOME ACTION] item and
press [OPEN] to confirm the selection.
3.
Under [HOME ACTION] choose [HOME TIME] item and press [OPEN] to confirm the
selection and enter into the home time setting item.
4.
Use Up/down P/T to modify the delay time, from 5 to 255 seconds.
5.
Press the [OPEN] key to save and exit. Press the [CLOSE] key to exit directly without saving.
HOME ACTION
Procedure:
6.
Call preset point 95 to enter the main menu.
7.
Use the Up/down cursor to choose [PANTILT SETTING] choose [HOME ACTION] item and
press [OPEN] to confirm the selection.
8.
Under [HOME ACTION] choose [HOME ACTION] item and press [OPEN] to confirm the
selection and set the home action item.
9.
Use Up/down P/T to modify the home action. The action to perform can be to call any of the
V2.0 7-31-12
HOME ACTION
→HOME TIME
: 255
HOME ACTION : OFF
23
Advertisement
Table of Contents
