Table of Contents
Advertisement
Menu Operation
Several functions can be accessed directly without using the camera's on screen menu display.
Note the following dedicated preset functions:
Call PRESET 95 ―― Enter into main OSD menu
Call PRESET 96 ―― Run pattern 1
Call PRESET 97 ―― Run Sequence 1
Call PRESET 92 ―― Set Left limit point for L/R scan
Call PRESET 93 ―― Set Right limit point for L/R scan
Call PRESET 99 ―― Run Left-right scan
NOTE: If Left limit point and Right limit point are set to the same position, calling preset 99
will execute a 360° scan.
Call PRESET 33 ―― Swing 180°
Call PRESET 34 ―― Return to Zero point
The on screen menu provides access to all camera functions through the use of a standard RS485
connection and PTZ controller.
As shown above, use the PTZ controller to CALL PRESET 95 and the camera's OSD menu will
appear overlaid upon the video output of the camera, as shown below.
V2.0 7-31-12
5. WIRING CONNECTIONS
6. FUNCTIONS and OPERATION
Special Use Preset Numbers
10
Advertisement
Table of Contents
