Mitsubishi Electric PL12AK User Manual page 3

Hide thumbs Also See for PL12AK:
Table of Contents

Advertisement

5. DRAIN PUMP FOR EASY PIPE CONNECTION (DRAIN LIFT-UP MECHANISM)
This mechanism, with its capacity to raise drain water 33-7/16 inch above the ceiling line, is convenient for removing water
and avoiding piping contact with beams, etc.
6. FRESH AIR INTAKE AND BRANCH DUCTING ARE AVAILABLE (on-site work)
7. REDI-CHARGED REFRIGERANT SYSTEM
The industry's first redi-charge refrigerant system.
There is no need to adjust the amount of refrigerant to match the piping length on-site unless lines exceed 100feet.
You will see a major reduction in installation time and labor costs.
8. HIGH RELIABILITY AND EASY SERVICING.
In addition to the self-diagnostic function, units are also equipped with a 3-minute time delay mechanism , an auto restart
function, an emergency operation function, a test run switch, etc., to assure high reliability and easy servicing.
9. NITROGEN GAS IS CHARGED TO INDOOR UNIT.
Indoor unit and refrigerant pipes are charged with nitrogen gas (N
) instead of (R22) before shipment from the factory.
2
OC246-3

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pl18akPl24akPl30akPl36akPl42ak

Table of Contents