Staple Operation - Konica Minolta bizhub C250 Service Manual

5. Operation
5.3.3

Staple operation

• After the paper stacking and alignment operation on the Finishing Tray have been com-
pleted, a stack of paper is taken up with the Upper, and Lower Exit Rollers by moving the
Swing Guide down with the Paddle Motor rotating in the reverse direction.
• Stapling is performed by moving the Staple Unit according to the specified stapling posi-
tion. However, if stapling is made at one place at the rear side, it is made at the stand-by
position without movement of the Stapler Unit.
• If the Staple Unit is moved toward the front side, the Finishing Tray Stopper is lowered.
Paper
1st Paper Exit Tray
Lower Exit Roller
18
Theory of Operation Ver. 1.0 Jul. 2005
Swing Guide Upper Exit Roller
Staple Unit
Finishing Tray Stopper
4583M620AA