Shift Gate Drive Mechanism; Shifter Drive Mechanism - Konica Minolta bizhub C250 Service Manual

Theory of Operation Ver. 1.0 Jul. 2005
5.2.2

Shift Gate drive mechanism

• If the Main Tray runs out of paper, while the Sub Tray is loaded with paper, the paper
stack on the Sub Tray is moved to the Main Tray.
• At this time, the Division Board Motor is energized to retract the front and rear Shift
Gates.
Division Board Motor (M3-LCT)
5.2.3

Shifter drive mechanism

• Then, the Shift Tray Motor is energized to move the Shifter so that the paper stack on the
Sub Tray is moved onto the Main Tray.
• The Shifter continues moving and stops when the Shift Tray Stop Sensor is activated.
When the Drawer Release button is thereafter pressed, the Shifter starts moving and
stops as soon as the Shift Tray Home Sensor is activated.
Shift Tray Home Sensor (PC12-LCT)
Shifter
Shift Tray Motor (M4-LCT)
Shifter
4061t2c103aa
Shift Tray Stop Sensor (PC11-LCT)
4348M622AA
Shift Gate move to outside
Shifter move
Shift Gate move to outside
Shift Tray Motor (M4-LCT)
5. Operations
4348M613AA
4348M614AA
7