Advertisement
Quick Links
Fuser
Installation Instructions
Caution! The fuser is very HOT after the
printer has been printing. Let the
printer cool down at least 10 minutes
before attempting to replace it.
To replace the fuser:
1. Turn off the printer.
If the hard disk drive is installed in your
Note:
printer, press the SHUTDOWN/RESTART
button for several seconds before
turning the printer off.
2. Open the top cover.
© 2005 Oki Data Americas, Inc.
3. Pull the fuser lock lever as shown to unlock the
fuser.
4. Grasp the fuser handle and lift the fuser out of
the printer. Dispose of it in accordance with local
regulations.
58371802
Advertisement
Related Manuals for Oki Fuser 58371802
Summary of Contents for Oki Fuser 58371802
-
Page 1: Installation Instructions
2. Open the top cover. © 2005 Oki Data Americas, Inc. 3. Pull the fuser lock lever as shown to unlock the fuser. 4. Grasp the fuser handle and lift the fuser out of the printer. - Page 2 5. Unpack the new fuser and lower it into the printer. 6. Push the lock lever as shown to lock the fuser in place. 7. Close the top cover. Oki Data Americas, Inc., 2000 Bishops Gate Blvd., Mt. Laurel, NJ 08054 WWW.OKIPRINTINGSOLUTIONS.COM/US 8. Turn the printer on.