Innovaphone ip1200 Administrator's Manual
  1. Manuals
  2. Brands
  3. Innovaphone Manuals
  4. Gateway
  5. IP1200
  6. Administrator's manual

Innovaphone ip1200 Administrator's Manual

Hide thumbs Also See for ip1200:
Table of Contents

Advertisement

Quick Links

See also: Product Data
IP gateway
IP1200
Administrator
Manual
P u r e
I P
T e l e p h o n y

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ip1200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Innovaphone ip1200

Summary of Contents for Innovaphone ip1200

  • Page 1 IP gateway IP1200 Administrator Manual P u r e T e l e p h o n y...
  • Page 2 Texts and illustrations have been compiled and software created with the utmost care, However errors cannot be completely ruled out. This documentation is therefore supplied under exclusion of any liability or warranty of suitability for specific purposes. innovaphone reserves the right to improve or modify this documentation without prior notice. ®...
  • Page 3 IP gateway IP1200 Manual Version 6.0 Release 6.0, 3rd edition, April 2007 PDF version available for download at: http://www.innovaphone.com ® Copyright © 2001-2007 innovaphone Böblinger Str. 76 71065 Sindelfingen, Germany Phone +49 (7031) 73009-0 Fax +49 (7031) 73009-99 http://www.innovaphone.com...

  • Page 4: Safety Instructions

    Disposal When due for disposal, the device must be returned directly to the manufacturer innovaphone AG in accordance with the WEEE guidelines (Waste Electrical and Electronic Equipment). The costs for returning the device shall be borne by innovaphone AG.

  • Page 5: Table Of Contents

    Table of contents Safety instructions ................4 Table of contents................. 5 1 Introduction ..................9 1.1 Standards .................. 9 1.2 Features ..................9 2 Initial start-up................. 11 2.1 Establish administrator access..........11 3 User interface.................. 13 3.1 Structure of the user interface..........13 3.2 Protected areas ...............
  • Page 6 4.1.2.6 Configuration/IP/Routing ..........30 4.1.3 Configuration/ETH0-1............. 31 4.1.3.1 Configuration/ETH0-1/Link..........31 4.1.3.2 Configuration/ETH0-1/DHCP ........... 31 4.1.3.3 Configuration/ETH0-1/IP ..........32 4.1.3.4 Configuration/ETH0-1/NAT ..........33 4.1.3.5 Configuration/ETH0-1/VLAN..........33 4.1.3.6 Configuration/ETH0-1/DHCP Server......... 34 4.1.3.7 Configuration/ETH0-1/DHCP Leases ........ 37 4.1.3.8 Configuration/ETH0-1/Statistics........38 4.1.4 Configuration/LDAP..............39 4.1.4.1 Configuration/LDAP/Server ..........
  • Page 7 NAT and firewalls................. 66 VoIP and heavily loaded WAN links ............68 Appendix C: Support ................70 Firmware upload .................. 70 innovaphone homepage ............... 70 Appendix D: Configuration of the update server ....... 71 System requirements ................71 Installation ..................71 Configuration..................
  • Page 8 Download ................... 79 Result ....................79 License Manager.................. 79 Appendix G: DECT coverage ............... 80 Appendix H: Glossary ................. 81 Keyword index................. 103...

  • Page 9: Introduction

    The IP1200 is an IP DECT gateway that integrates DECT-compatible subscribers in the innovaphone PBX. It enables very complex DECT systems to be set up. With the multicell capability of the IP1200 base station, several devices can be installed, between which roaming and automatic handover operate. A base station supports up to 12 channels in parallel.
  • Page 10 All instructions in this manual should be followed carefully and the device should only be used as intended. The manufacturer assumes no responsibility for any personal injury, damage to property or subsequent damage that can be attributed to improper use of the device. page 10 innovaphone IP DECT...

  • Page 11: Initial Start-Up

    MAC address, where ipxxx is to be replaced with the device name (e.g. ip800 or ip1200) and xx-xx-xx is to be replaced with the last 6 hexadecimal digits of the serial number)
  • Page 12 The initial start-up of the device concerns only the ETH0 interface. The ETH1 interface has the fixed IP address 192.168.1.1 during initial start-up. Note The state when shipped can be restored through a long reset. page 12 innovaphone IP DECT...

  • Page 13: User Interface

    In the Administration category, the settings for active operation can be made. This includes the adding of new users to the innovaphone PBX, for example. Depending on which main menu entry is currently active or on which setting was made in a submenu, the structure or content of the submenu can change.

  • Page 14: Saving The Settings

    VoIP device has: • The standard user name admin and • The standard user password ipxxx (ipxxx stands for the device type, for example, ip800, ip1200, etc.). Caution To raise the security of the VoIP device, the standard user and the standard Configuration/ password should always be changed (see chapter entitled “...

  • Page 15: Configuration And Administration

    Protocol) used, if configured. Time The time of the device in accordance with the specifications of the NTP server (Network Time Protocol) and the time zone. Uptime The operating time since the last cold or warm start. innovaphone IP DECT Page 15...

  • Page 16: Configuration/General/Admin

    IP302, for example, centrally. • Basic LIC - Enables installation of the PBX and Voicemail LIC. It is a basic page 16 innovaphone IP DECT...
  • Page 17 Media Gateway as a PBX. The licence size is selected in accordance with the number of necessary registra- tions on the PBX. An approximate value can be calculated from the number of connected user devices (including fax machines / DECT handsets, etc.) plus 10-15%.

  • Page 18: Configuration/General/Update

    Through specification of an NTP (Network Time Protocol) server, the VoIP device is able to synchronise its internal clock with an external time source. This is re- quired, as without specification of a time server the internal time is reset to 0:00 page 18 innovaphone IP DECT...

  • Page 19: Configuration/General/Http Server

    Access to the device can be restricted to a particular network stations 192.168.0.0 / 255.255.0.0 area (for example, ) or to a particu- 192.168.0.23 / lar network address (for example, 255.255.255.255 In addition, all active HTTP sessions are displayed under the Active HTTP sessions section. innovaphone IP DECT Page 19...

  • Page 20: Configuration/General/Http Client

    The authorised user who has access to the directory. Password The relevant password of the user. 4.1.1.8 Configuration/General/Logging External logging is disabled as standard (Off). After selection of a log type, logging is enabled, as are the relevant entry fields. Logging is disabled. page 20 innovaphone IP DECT...
  • Page 21 Web server, then the value / cdr/cdrwrite.asp is entered. The device will then make a GET /cdr/cdr-write.asp?event=sys- log&msg=logmsg request to the Web server. innovaphone IP DECT Page 21...

  • Page 22: Configuration/General/Snmp

    Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or downloaded directly in the download area of the innovaphone homepage (http://www.innovaphone.com). public...

  • Page 23: Configuration/Ip/Settings

    Port settings in respect of NAT and firewalls section “ ”. First UDP This entry restricts the range of ports that may use UDP NAT NAT port / data (Network Address Translation). numbers of port innovaphone IP DECT Page 23...

  • Page 24: Configuration/Ip/Nat

    IP address as standard, the destination IP address must be nation entered here. Port-speci- To be able to address several internal destinations, different fic forwar- port number numbers are assigned to IP addresses of the ding internal network here. page 24 innovaphone IP DECT...

  • Page 25: Configuration/Ip/H.323 Nat

    (ETH) are also possible. Descriptive A descriptive name for the interface can be entered here. Name This name is used for the overview in the PPP State submenu Configuration/IP/PPP State (see chapter entitled “ ”). innovaphone IP DECT Page 25...
  • Page 26 IP address are lost. Exclude With this setting, a particular interface can be excluded from interface NAT (Network Address Translation), should NAT be enabled Configuration/IP/NAT from NAT (see chapter entitled “ ”). page 26 innovaphone IP DECT...
  • Page 27 (Access network, a broadcast is sent for identification. Concentra- tor) PPTP section: This operating mode applies for inbound and outbound calls. The PPTP (Point- to-Point Tunneling Protocol) implements private VPN connections via the Inter- innovaphone IP DECT Page 27...
  • Page 28 If quality losses of this kind occur, a decision has to be made between security or voice quality. The innovaphone devices can dial into a remote PPTP server as a PPTP client, as well as provide a dial-in point themselves.
  • Page 29 Network The network address of the new route being added. Address Network The network mask of the new route being added. Mask Gateway The network address of the default gateway. innovaphone IP DECT Page 29...

  • Page 30: Configuration/Ip/Ppp State

    The associated network mask. Mask Gateway The IP address of the default router. Interface Displays the interface on which the route was created. Possible ETH0 ETH1 PPP0-31, Local ISDN. interfaces are: Down. State Possible states are: page 30 innovaphone IP DECT...

  • Page 31: Configuration/Eth0-1

    Configuration/ETH0-1/DHCP Server chapter " ”. DHCP Client mode Client , the device receives its IP configuration from a DHCP server to whose network the device is connected. innovaphone IP DECT Page 31...

  • Page 32: Configuration/Eth0-1/Ip

    Ethernet segment, which do not have a cor- rect routing entry, to communicate over the device and use the WAN connection. To allow dial-in access to the entire network, Proxy ARP function must be enabled. page 32 innovaphone IP DECT...

  • Page 33: Configuration/Eth0-1/Nat

    IP network area that should not be included in the Network Mask Address Translation. 4.1.3.5 Configuration/ETH0-1/VLAN If a network uses several VLANs (Virtual Local Area Network), a VLAN can be specified for every Ethernet interface . This ensures that the data packets are innovaphone IP DECT Page 33...

  • Page 34: Configuration/Eth0-1/Dhcp Server

    Service) off according to 802.1q. Priority If the switch at the port to the innovaphone gateway happens to be configured to a different ID, the same value must be entered here to allow the Ethernet packets to be prioritised. A priority va- lue between 0 and 7 is entered here (configuration on the Ether- net switch).
  • Page 35 Dial Tones * The dial tone that is transmitted as the standard dial tone to German PBX the VoIP telephones (for example, = as German PBX, = US dial tone, = British dial tone). innovaphone IP DECT Page 35...
  • Page 36 LDAP configuration. Update All devices integrated via DHCP are assigned the interval spe- Interval cified here in the Interval [min] field of the update server [min] (see chapter entitled “Configuration/General/Update”). page 36 innovaphone IP DECT...

  • Page 37: Configuration/Eth0-1/Dhcp Leases

    0. The VLAN ID with the value 0 switches QoS (Quality of Service) off according to 802.1q ab. If the switch at the port to the innovaphone device happens to be configu- red to a different VLAN ID, the same value must be specified here to allow a prioritisation from the Ethernet.

  • Page 38: Configuration/Eth0-1/Statistics

    The number of successfully received packets. rx-unicast The number of successfully received unicast packets. rx-broad- The number of successfully received broadcast packets. cast page 38 innovaphone IP DECT...

  • Page 39: Configuration/Ldap

    The total number of sent and received packets of 1024 Bytes. 4.1.4 Configuration/LDAP The LDAP server and replicator configuration can be performed here. The LDAP server makes the local LDAP database available to external clients. innovaphone IP DECT Page 39...

  • Page 40: Configuration/Ldap/Server

    4.1.4.3 Configuration/LDAP/Replicator LDAP replication can be configured here. The task of LDAP replication is to copy and keep up to date the entire content or parts of the user database of a remote innovaphone PBX. page 40 innovaphone IP DECT...

  • Page 41: Configuration/Ldap/Replicator-Status

    Displays the state of the replication in push direction. Number of locally added objects. Number of locally deleted objects. modify Number of locally modified objects. notify Number of notifications that have arisen locally. pending Number of locally waiting objects. innovaphone IP DECT Page 41...

  • Page 42: Configuration/Dect

    4.1.5 Configuration/DECT DECT-specific settings of the IP1200 are made in this chapter. 4.1.5.1 Configuration/DECT/System The general configuration of the DECT system, as well as the allocation of the DECT system name and password are performed in this submenu. Name The name of the DECT system. This name determines the name of the LDAP object in which the system parameters are stored.

  • Page 43: Configuration/Dect/Master

    4.1.5.2 Configuration/DECT/Master It is necessary to configure the operating mode of the DECT system. A gatekee- per must also be specified here, on which the innovaphone PBX component is operated. Mode Active switches on the DECT master function. In every DECT system, there must be a DECT master.

  • Page 44: Configuration/Dect/Features

    The protocol to be used for the communication. There is a choice between: RFC 1889 • H.323 ( ), which is the recommended protocol for innovaphone VoIP devices, since it contains most fea- tures. RFC 3261 • SIP ( 4.1.5.3 Configuration/DECT/Features...
  • Page 45 2 $ characters are the new PIN. Call protection With this function the reaction to incoming calls can be handled specially. In silence mode the telephone will getting muted. The caller still can hear the free-tone. Aktivität Code Beschreibung innovaphone IP DECT Page 45...
  • Page 46 Do not No internal calls are put through if the Disturb Int. check box is checked. *421# #421# Do not No external calls are put through if the Disturb Ext. check box is checked. *422# #422# page 46 innovaphone IP DECT...
  • Page 47 R*16$(1) With , a call can be parked by pressing the R key and then entering the Feature Code (1 = position on own extension). Unpark Unpark #16$(1) With , it can be retrieved again. innovaphone IP DECT Page 47...

  • Page 48: Configuration/Dect/Radio

    The IP address of the DECT master. If the device itself was defined as the DECT master, then no IP address has to be entered here. The local IP address 127.0.0.1 is automati- cally entered. Alt Master The IP address of the standby master. page 48 innovaphone IP DECT...

  • Page 49: Administration

    The registration (subscription) of DECT handsets is also possible without a PBX component directly at the IP1200. Each handset is identified via its unique IPEI number. The effect of subscription to the telephone is that, as in LDAP, the sub- scription is stored in the telephone.

  • Page 50: Administration/Dect/Users

    Finally, the total operating time of the DECT subsystem is displayed. 4.2.1.2 Administration/DECT/Users All users configured on the IP1200 are listed here. If LDAP replication with the innovaphone PBX was established, the DECT users configured in the PBX are also diplayed here.

  • Page 51: Administration/Dect/Unknown

    12-digit IPEI number It is possible to assign an access code (AC) to a user when setting up the user in the innovaphone PBX. It this was done, the access code is displayed here. See also the chapter titled Configuration/DECT/System „...

  • Page 52: Administration/Dect/Mastercalls

    Device Name entry field as descri- Configuration/General/Admin bed in chapter „ “. If no product name (Device Name) was configured, the standard name of the device is used (for example, innovaphone IP1200). Version Displays the current firmware version of the respective DECT device. Uptime...

  • Page 53: Administration/Dect/Radiocalls

    PBX subscribers are not displayed if the optional innovaphone PBX component is installed. Calling subscriber <Sender> Called subscriber <Receiver> State Call is being set up Calling Call is being signalled...

  • Page 54: Administration/Dect/Radio

    There are several ways to update the VoIP device. Note Detailed informations respectively the status display by the Ready LED while uploading files to the device can be found in the innovaphone knowledge- How to Reset IPXXX , factory default, led behaviour, tftp base article „...

  • Page 55: Administration/Upload/Config

    Configuration/General/Update in the chapter “ ”. New firmware versions can be obtained from a certified innovaphone dealer or directly via the innovaphone ho- mepage (http://www.innovaphone.com). By specifying path and file name of the configuration file to be loaded in the Firmware File field and then clicking the Upload button, the configuration file is loaded into the device.

  • Page 56: Administration/Upload/Radio

    This function can be used to load a new boot code version onto the VoIP device. New boot code versions can be obtained from a certified innovaphone dealer. By specifying path and file name of the boot code firmware to be loaded in the Boot File field and then clicking the Upload button, the boot code firmware is loaded into the device.

  • Page 57: Administration/Diagnostics

    SIP Regi- All SIP registrations. strations Config All configuration changes. Changes TEL1-n All TEL1-n connections – only visible for devices with TEL interface. All PPP connections – only visible for devices with PPP inter- face. innovaphone IP DECT Page 57...

  • Page 58: Administration/Diagnostics/Tracing

    BRI1-n Information on the BRI1-n interface. PRI1-n Information on the PRI1-n interface. prot The prot check boxes after the individual interface settings give information on the protocol used. VOIP section: H.323/ Information on H.323 RAS. page 58 innovaphone IP DECT...

  • Page 59: Administration/Diagnostics/Config Show

    Information on the HTTP client. HTTPCLI-- Detailed information on the HTTP client. ENT ver-- bose Clicking saves the settings made. 4.2.4.3 Administration/Diagnostics/Config Show Config Show enables the output of the current configuration of the VoIP device in text format. innovaphone IP DECT Page 59...

  • Page 60: Administration/Diagnostics/Ping

    “ inside Indicators and Connectors Reset Table 1 „ “ („ “). More detailed informations can be found in the innovaphone knowledgebase How to Reset IPXXX , factory default, led behaviour, tftp mode,clear article „ config,gwload “ (http://www.innovaphone.com/inno-kb/). 4.2.5.1 Administration/Idle Reset With an Idle Reset, the VoIP device is reset as soon as no more active calls are being carried out.

  • Page 61: Administration/Reset/Reset

    With a TFTP Reset, the VoIP device is transferred to TFTP mode. In this mode, the device can only be accessed with the GWLoad tool and thus allocated an IP address. Further information on the innovaphone GWLoad tool may be found in the innovaphone Knowledgebase.

  • Page 62: Appendix A: Connectors And Control Elements

    POWER Socket for connecting an external plug-in mains adapter. ALARM LED to indicate that the IP1200 is carrying out a restart or that a malfunction error exists. READY LED to indicate that the IP1200 is ready for operation. page 62...
  • Page 63 POWER LED to indicate that the IP1200 has a power supply. RESET In addition to reset the device by the webbrowser, there are three (four) more ways given by the reset button, to reset the device. Short Reset: A short reset is restarting the device.

  • Page 64: The Serial Number Label

    (MAC address) Fig. 2 - Serial number label of the IP1200 The MAC address is also the serial number of your IP1200. The first three constant hexadecimal digits separated by a hyphen (`-´) are innovaphone’s manufacturer identification code (009033 or 00-90-33), whilst the last three hexadecimal digits (0F06DA or 0F-06-DA) are the consecutive serial number of your IP1200.

  • Page 65: Appendix B: Troubleshooting

    Make sure that the exclusive“ remote VoIP device, channel cannot „ check box is but no voice be set up, since disabled. connections can be the two VoIP established. devices do not have a common voice encoder. innovaphone IP DECT Page 65...

  • Page 66: Nat And Firewalls

    VoIP devices can be this purpose. established. NAT and • See chapter “ firewalls ” for more information. Table 2 Troubleshooting NAT and firewalls If there is a firewall protecting your network from the Internet and connections page 66 innovaphone IP DECT...
  • Page 67 The number of ports to be released can be restricted if the H.323 devices whose data is to cross the firewall are all innovaphone devices. The following ports must be released in both directions: •...

  • Page 68: Voip And Heavily Loaded Wan Links

    In this case, you will not be able to set up any voice connections from within the network to the device (for example, with innovaphone Softphone PCs). If the network is operated in NAT mode and the product you are using does not support H.323 NAT, then it is not possible to operate beyond the firewall.
  • Page 69 This can result in poor quality in spite of prioritisation. In such a case, you should check whether this interruption can be separately enabled. Some routers refers to this function, somewhat confusingly, as interleaving. innovaphone IP DECT Page 69...

  • Page 70: Appendix C: Support

    The innovaphone homepage (http://www.innovaphone.com) contains all current service packs, boot codes, hot fixes, firmware updates, manuals, datasheets, etc. It is also possible to request the innovaphone newsletter to stay up to date with current innovaphone news. In future, it will be possible to make complaints online via the innovaphone homepage.

  • Page 71: Appendix D: Configuration Of The Update Server

    It is possible to update the firmware and configuration of a large number of innovaphone devices in a distributed environment by automated means. This is done by storing the configuration and firmware information on a standard Web server, which in turn is called up the individual devices.

  • Page 72: Running Maintenance

    If the URL happens to end with a ‘/’, then a standard file name based on the product description is used. If, for example, the URL is http://1.2.3.4/ configs/ , then it is extended in the case of an IP1200 as follows: http:// 1.2.3.4/configs/update-ip1200.htm . The product name is specified in the first line in chapter “Configuration/General/Info”.

  • Page 73: Time Command

    (or empty if the device was reset with the standard settings) called UPDATE/CHECK. The check command compares the content of <serial> with the UPDATE/CHECK variable. If both match, all further processes of the maintenance file are terminated.
  • Page 74 This command downloads new firmware (if available) from the specified URL onto the device. Finally, the <final-command> is executed. innovaphone devices have an internal variable that is initially empty (or empty if the device was reset with the standard settings) called UPDATE/PROT. The prot command compares the content of <build-serial>...
  • Page 75 A Web server exists at the address 192.168.0.10 with a subdirectory called configs. In this directory, there are two further subdirectories, in which the current firmware files for all innovaphone devices are stored. Clients provide the DHCP server with the option #215 as http://...
  • Page 76 This example demonstrates how the configuration of a device is stored on a Web server; all IP1200 devices are then instructed to load/update the firware version 04-5679 in the time period 23:00 hrs to 04:59 hrs. New devices are updated after a restart and after the specified six minutes have elapsed.

  • Page 77: Appendix E: Configuration Of An Ntp Server/Client

    Any Windows server can operate as the NTP server. Equally, there are various NTP software packages for Windows and Unix/Linux platforms. The innovaphone VoIP devices also work simultaneously as NTP servers. If several devices are being used, one device can synchronise with a time server (external if need be), and all other devices, in turn, can synchronise with this one device.
  • Page 78 The format for a time entry is hh[:mm[:ss]], in the 24-hour format. The Central European time zone which applies to Germany is specified as follows: CET-1CEST-2,M3.5.0/2,M10.5.0/3 Further information on the POSIX standard can be called up on the Web at http://standards.ieee.org/catalog/olis/posix.html. page 78 innovaphone IP DECT...

  • Page 79: Appendix F: Instructions For Downloading Licences

    Login The login screen is then displayed. If no licences have yet been downloaded from innovaphone, the Help pages should be readed first. Otherwise, enter a valid e-mail address in the E-mail field and a relevant password in the Password field.

  • Page 80: Appendix G: Dect Coverage

    DECT radio on-site measurement. This is ultimately the only way to determine how many locations must be equipped with DECT base stations and repeaters. innovaphone AG provides a mobile DECT installation tool for carrying out this measurement without the prior installation of a DECT environment. This tool can be lent or leased, and is thus a cost-effective way to bring a professional DECT environment into operation.

  • Page 81: Appendix H: Glossary

    Appendix H: Glossary This glossary relates to all innovaphone gateways, including innovaphone DECT gateways: A-law The A-law method is a method for the dynamic compression of audio signals, which is described in the ITU G.711 recommendation. The dynamic compression improves the signal-to-noise ratio under equivalent transmission conditions.
  • Page 82 IP master). All other DECT radios are controlled by it. The DECT radio in this master IP1200 can be used (usually it is used as a normal DECT radio; only if the IP DECT system uses more than 64 base stations, should...
  • Page 83 Reference). For outbound connections, it is allocated by the terminal, for inbound connections by the network. CTI (Computer Telephony Integration) is a value-added service for raising efficiency in voice transmission. With this service, very simple applications, such as computer-aided call number dialling, through to complete call innovaphone gateway Page 83...
  • Page 84 DECT base station A DECT base station can set up a voice channel between an IP DECT telephone and the innovaphone PBX. DECT controller Short for CCFP (Central Controller Fixed Part).
  • Page 85 Internet, and defines how a telephone number is mapped on a domain address. The telephone numbers are integrated in the DNS (Domain Name System). For the conformance of the telephone numbers to the innovaphone gateway Page 85...
  • Page 86 DECT GAP fixed part and portable part. This profile has been established by ETSI as an important part of a set of DECT profiles. Every DECT device must support one or more profiles to be functional. Page 86 innovaphone gateway...
  • Page 87 VoIP. Real-time communication in LANs is defined using this standard. The H.323 standard consists of a whole series of protocols for signalling, the innovaphone gateway Page 87...
  • Page 88 DECT system. IP master The IP1200 that controls all other DECT base stations in an IP DECT system is often referred to as the IP master. It is possible that it is the same DECT...
  • Page 89 It is normally implemented as a diffusion network and achieves transfer rates of up to 10 Gbit/s (10 Gigabit Ethernet). LANs can be wired (like the innovaphone gateway Page 89...
  • Page 90 (international version) and a 128-bit key length (US version). Data encoding is based on RSA 4 Stream Cipher (RC4). In the case of the 128-bit key, a 64-bit part of the key is changed for each new session to raise Page 90 innovaphone gateway...
  • Page 91 Therefore, a NAT device with two network adapters can connect the local private network with the Internet, for example. NAT is divided into two innovaphone gateway Page 91...
  • Page 92 The OSI model has been developed since 1979 and has been standardised by the ISO. It is used as the basis for a series of manufacturer-independent network protocols, which are used almost exclusively in the transport Page 92 innovaphone gateway...
  • Page 93 8-wire Ethernet cable. POSIX POSIX (Portable Operating System Interface for UniX) is a standardised application-level interface jointly developed by the IEEE (Institute of Electrical and Electronics Engineers) and the Open Group for Unix. It innovaphone gateway Page 93...
  • Page 94 64 kbit/s are available to the end-user via the S2M interface. QoS (Quality of Service) refers to all procedures that influence the data flow in LANs (Local Area Networks) and WANs (Wide Area Networks) so that the Page 94 innovaphone gateway...
  • Page 95 PBX. A repeater increases the coverage area of the IP DECT system, but not the maximum possible number of calls made simultaneously. A repeater requires a synchronisation source (just like every other DECT radio). The DECT radio used as the synchronisation chain is likewise used to innovaphone gateway Page 95...
  • Page 96 If a repeater has another repeater specified as the synchronisation source, one refers to a repeater chain. None of the DECT radios in a repeater chain can be specified as the synchronisation source for an IP1200 DECT radio. For repeater chains, special rules apply.
  • Page 97 Rather a small set of data is transferred, which allows the generation of background noise on the receiver side. CFG (Comfort Noise Generator) starts precisely at this point. It is capable of generating background noise independently. For this, it uses the background innovaphone gateway Page 97...
  • Page 98 For DECT radios to be able to communicate, they must be synchronised with one another. In an IP1500 system, synchronisation is obtained using the 2- wire interface of the CCFP. In an IP1200 system, it is obtained via the air, however. Therefore, an IP1200 configured as a DECT radio must be created within the coverage of another DECT radio, from which synchronisation can be obtained.
  • Page 99 Sync master The DECT radio in an IP1200 installation that does not obtain its synchronisation from another source. Is also used in the IP1200 DECT radio configuration to configure the sync source of the DECT radios. Sync source A DECT radio which serves as the synchronisation source for other DECT radios.
  • Page 100 Uniform Resource Locator refers to a subtype of Uniform Resource Identifiers (URI). URLs identify a resource via its primary access mechanism Page 100 innovaphone gateway...
  • Page 101 The term VPN (Virtual Private Network) is used with different meanings. Very generally, one refers to a VPN if customer-specific, logical subnetworks are being created within a public switched network. They may be networks for voice communication, or X.25, Frame Relay or ISDN networks. The usual innovaphone gateway Page 101...
  • Page 102 WINS server. When a client logs off, the address is released again and can be reassigned. WRFP WRFP (Wireless Radio Fixed Part) is used as a synonym for repeater. Page 102 innovaphone gateway...

  • Page 103: Keyword Index

    Keyword index Adapt to Cisco PPP peers Symbols Address µ-law Address Ranges 11, 16 Numerics Administrator access 23, 35, 68 Administrator name 0x10 Administrator password 10 MBit Full Duplex Administrator user ID 10 MBit Half Duplex Alarm LED A-law 100 MBit Full Duplex Allow Anonymous 100 MBit Half Duplex Allow inbound connections...
  • Page 104 Bearer handover 70, 75 Boot code Class Boot code firmware Cleanup 15, 56, 75 Boot code version Clear All Leases Boot command Clear Dynamic Leases Boot File Clear Local Settings Clear Reserved Leases BRI LIC Client 15, 35, 43 BRI1-x Coder Broadcast Cold start...
  • Page 105 80, 84 Dial tone DECT controller Dial Tones DECT coverage Dialling Location DECT environment Digest hash authentication 42, 49 DECT handset Directed 42, 48 DECT information Disable DECT installation Disable HTTP basic authentication 41, 43, 48, 49, 52, DECT master Disabled 41, 48, 49, 52, 53, DECT radio...
  • Page 106 Enable Telnet 35, 43 Enbloc Dialling Gatekeeper 36, 42 35, 43 en-bloc dialling Gatekeeper ID Enblock Dialling Timeout Gatekeeper Identifier * ENUM Gatekeeper IP address 12, 30, 31, 62 29, 30, 33 ETH0 Gateway 12, 30, 31 ETH1 General 31, 33 Ethernet interface General information ETHn...
  • Page 107 Immediate reset Inbound Connections Known subscription Inbound Password Inbound User Include Interface in NAT Language Initial start-up Last Address 4, 80 innovaphone AG Last sync 22, 55, 56 innovaphone dealer 52, 90 LDAP innovaphone GWLoad LDAP clients 22, 70 innovaphone homepage...
  • Page 108 Leave Lease Time Licence type Mode Licences Modify 20, 90 Link 28, 90 Link Configuration MPPE Link type MS IIS 30, 41 Local Local Media Local R Key/Display Handling MTU size 33, 91 Local Subscriber Number Multicast 22, 41, 80 Location Multicell 21, 57...
  • Page 109 NTP software packages Power LED 4, 11 Power over Ethernet 4, 11 Power supply 20, 43, 46, 47 Offer Parameters 25, 57, 94 Offset PPP connection Operating modes PPP interface 22, 57 Operating state PPP Interface PPPn Operating temperature PPP0-31 15, 50, 52 Operating time 27, 94...
  • Page 110 RFC 1889 RFC 3261 R key 53, 95 Radio Radio File 49, 52 RJ45 Radio ID Roaming Radio Part Number Route Radio Signal Strength Indication Route to Interface RAS protocol Read 11, 62 RSSI Ready LED reference Reference configurations Running maintenance Registered Clients Registration Rx-abandon...
  • Page 111 Rx-tx-512-1023 Standard router 73, 74 Rx-tx-64 Standard settings Rx-tx-64-127 Standard user name Rx-unicast Standard user password Standby Standby master Save Frame As Standby PBX Saving the settings 41, 52 Starting 43, 97 30, 53 State SCFG command Stateless Operation Secondary Gatekeeper 33, 35 Static IP routes 15, 64...
  • Page 112 Syslogd Trap 42, 49 Sys-Mask Trap destinations Trap messages 65, 66 Troubleshooting Table of contents Tunneling 21, 57, 99 Twisted pair cable TCP connection TEL1-x Tx-broadcast Telnet Tx-collision Telnet protocol Tx-deferred Telnet session Tx-error TFTP Tx-error-49 TFTP mode Tx-error-50 TFTP Reset Tx-excesscol TFTP server Tx-good...
  • Page 113 Update script Equipment 18, 36, 37, 71, 72 21, 71 Update server Web server Update Server URL WEEE guidelines 55, 56 Upload Windows server 15, 52 Uptime WINS 18, 20, 37, 72, 74, 100 WINS server URL parameter Winter time 20, 50 User With User AC only...

Table of Contents