Innovaphone IP6000 Administrator's Manual
  1. Manuals
  2. Brands
  3. Innovaphone Manuals
  4. Gateway
  5. IP6000
  6. Administrator's manual

Innovaphone IP6000 Administrator's Manual

Ip gateway
Hide thumbs Also See for IP6000:
Table of Contents

Advertisement

Quick Links

Download this manual
IP gateway
IP6000
Administrator
Manual
P u r e
I P
T e l e p h o n y

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IP6000 and is the answer not in the manual?

Questions and answers

Related Manuals for Innovaphone IP6000

Summary of Contents for Innovaphone IP6000

  • Page 1 IP gateway IP6000 Administrator Manual P u r e T e l e p h o n y...
  • Page 2 Texts and illustrations have been compiled and software created with the utmost care, However errors cannot be completely ruled out. This documentation is therefore supplied under exclusion of any liability or warranty of suitability for specific purposes. innovaphone reserves the right to improve or modify this documentation without prior notice. ®...
  • Page 3 IP gateway IP6000 Manual Version 6.0 Release 6.0, 2nd edition, April 2007 PDF version available for download at: http://www.innovaphone.com ® Copyright © 2001-2007 innovaphone Böblinger Str. 76 71065 Sindelfingen, Germany Phone +49 (7031) 73009-0 | Fax +49 (7031) 73009-99 http://www.innovaphone.com...

  • Page 4: Safety Instructions

    Disposal When due for disposal, the device must be returned directly to the manufacturer innovaphone AG in accordance with the WEEE guidelines (Waste Electrical and Electronic Equipment). The costs for returning the device shall be borne by innovaphone AG.

  • Page 5: Table Of Contents

    Table of contents Safety instructions ................4 Table of contents................. 5 1 Introduction ..................10 1.1 Scalable in both directions............10 1.2 Connection option ..............10 1.3 Two Ethernet interfaces guarantee flexible use ..... 10 1.4 Features .................. 10 2 Initial start-up................. 12 2.1 Establish administrator access..........
  • Page 6 4.1.2.2 Configuration/IP/NAT ............. 25 4.1.2.3 Configuration/IP/H.323 NAT ........... 26 4.1.2.4 Configuration/IP/PPP Config ........... 26 4.1.2.5 Configuration/IP/PPP State ..........31 4.1.2.6 Configuration/IP/Routing ..........31 4.1.3 Configuration/ETH0-1............. 32 4.1.3.1 Configuration/ETH0-1/Link..........32 4.1.3.2 Configuration/ETH0-1/DHCP ........... 32 4.1.3.3 Configuration/ETH0-1/IP ..........33 4.1.3.4 Configuration/ETH0-1/NAT ..........34 4.1.3.5 Configuration/ETH0-1/VLAN..........
  • Page 7 4.2.1.4 Administration/PBX/Objects..........52 4.2.1.4.1 User Object:............55 4.2.1.4.2 Boolean Object:............ 55 4.2.1.4.3 Call Broadcast Object:........... 57 4.2.1.4.4 DECT System Object ..........57 4.2.1.4.5 DTMF Features Object........... 58 4.2.1.4.6 Executive Object:..........58 4.2.1.4.7 Gateway Object ............ 59 4.2.1.4.8 MCast Announcement Object:........ 59 4.2.1.4.9 Message Waiting Object: ........
  • Page 8 NAT and firewalls ................101 VoIP and heavily loaded WAN links ............103 Anhang C: ISDN-Errorcodes .............105 Appendix D: Support ................ 108 Firmware upload.................108 innovaphone homepage ..............108 Appendix E: Configuration of the update server ......109 System requirements ................109 Installation..................109 Configuration ..................109 Running maintenance .................110...
  • Page 9 Login ....................117 Download ..................117 Result ....................117 License Manager ................117 Appendix H: Glossary ............... 118 Keyword index ................140...

  • Page 10: Introduction

    VoIP gateway IP6000 is the gateway for ISDN primary rate interfaces. It serves as a link between traditional telephony and IP telephony, connecting them through up to 2 PRI lines. Systems with an IP6000 serving as the basis for innovaphone's PBX can manage up to 1000 extensions.
  • Page 11 All instructions in this manual should be followed carefully and the device should only be used as intended. The manufacturer assumes no responsibility for any personal injury, damage to property or subsequent damage that can be attributed to improper use of the device. innovaphone IP DECT Page 11...

  • Page 12: Initial Start-Up

    (e.g. ip800 or ip1200) and xx-xx-xx is to be replaced with the last 6 hexadecimal digits of the serial number) NetBIOS remote machine name table Name Type Status --------------------------------------------- ipxxx-XX-XX-XX<00> UNIQUE Registered 195-226-104-217<00> UNIQUE Registered page 12 innovaphone IP DECT...
  • Page 13 The initial start-up of the device concerns only the ETH0 interface. The ETH1 interface has the fixed IP address 192.168.1.1 during initial start-up. Note The state when shipped can be restored through a long reset. innovaphone IP DECT Page 13...

  • Page 14: User Interface

    In the Administration category, the settings for active operation can be made. This includes the adding of new users to the innovaphone PBX, for example. Depending on which main menu entry is currently active or on which setting was made in a submenu, the structure or content of the submenu can change.

  • Page 15: Protected Areas

    Protected areas Apart from the start page, all areas of the device are password-protected. When shipped from the factory, the innovaphone VoIP device has: • The standard user name admin and • The standard user password ipxxx (ipxxx stands for the device type, for example, ip800, ip1200, etc.).

  • Page 16: Configuration And Administration

    Protocol) used, if configured. Time The time of the device in accordance with the specifications of the NTP server (Network Time Protocol) and the time zone. Uptime The operating time since the last cold or warm start. page 16 innovaphone IP DECT...

  • Page 17: Configuration/General/Admin

    • Basic LIC - Enables installation of the PBX and Voicemail LIC. It is a basic prerequisite for operating the innovaphone Media Gateway as a PBX. The licence size is selected in accordance with the number of necessary registra- tions on the PBX. An approximate value can be calculated from the number of connected user devices (including fax machines / DECT handsets, etc.)
  • Page 18 Upload, additional licences can be loaded onto the device. With this upload procedure, the licences are saved in the configuration of the de- vice and are available after a short restart. The installed licence is displayed. page 18 innovaphone IP DECT...

  • Page 19: Configuration/General/Update

    Through specification of an NTP (Network Time Protocol) server, the VoIP device is able to synchronise its internal clock with an external time source. This is re- quired, as without specification of a time server the internal time is reset to 0:00 innovaphone IP DECT Page 19...

  • Page 20: Configuration/General/Http Server

    Access to the device can be restricted to a particular network stations 192.168.0.0 / 255.255.0.0 area (for example, ) or to a particu- 192.168.0.23 / lar network address (for example, 255.255.255.255 In addition, all active HTTP sessions are displayed under the Active HTTP sessions section. page 20 innovaphone IP DECT...

  • Page 21: Configuration/General/Http Client

    The authorised user who has access to the directory. Password The relevant password of the user. 4.1.1.8 Configuration/General/Logging External logging is disabled as standard (Off). After selection of a log type, logging is enabled, as are the relevant entry fields. Logging is disabled. innovaphone IP DECT Page 21...
  • Page 22 Web server, then the value / cdr/cdrwrite.asp is entered. The device will then make a GET /cdr/cdr-write.asp?event=sys- log&msg=logmsg request to the Web server. page 22 innovaphone IP DECT...

  • Page 23: Configuration/General/Snmp

    Network Management Protocol with version 1.0). Standard MIB II and a manufacturer-specific MIB (Management Information Base) are supported. Detailed information about this MIB can be obtained from a certified innovaphone dealer or downloaded directly in the download area of the innovaphone homepage (http://www.innovaphone.com). public...

  • Page 24: Configuration/Ip/Settings

    Port settings in respect of NAT and firewalls section “ ”. First UDP This entry restricts the range of ports that may use UDP NAT NAT port / data (Network Address Translation). numbers of port page 24 innovaphone IP DECT...

  • Page 25: Configuration/Ip/Nat

    IP address as standard, the destination IP address must be nation entered here. Port-speci- To be able to address several internal destinations, different fic forwar- port number numbers are assigned to IP addresses of the ding internal network here. innovaphone IP DECT Page 25...

  • Page 26: Configuration/Ip/H.323 Nat

    (ETH) are also possible. Descriptive A descriptive name for the interface can be entered here. Name This name is used for the overview in the PPP State submenu Configuration/IP/PPP State (see chapter entitled “ ”). page 26 innovaphone IP DECT...
  • Page 27 IP address are lost. Exclude With this setting, a particular interface can be excluded from interface NAT (Network Address Translation), should NAT be enabled Configuration/IP/NAT from NAT (see chapter entitled “ ”). innovaphone IP DECT Page 27...
  • Page 28 (Access network, a broadcast is sent for identification. Concentra- tor) PPTP section: This operating mode applies for inbound and outbound calls. The PPTP (Point- to-Point Tunneling Protocol) implements private VPN connections via the Inter- page 28 innovaphone IP DECT...
  • Page 29 If quality losses of this kind occur, a decision has to be made between security or voice quality. The innovaphone devices can dial into a remote PPTP server as a PPTP client, as well as provide a dial-in point themselves.
  • Page 30 Network The network address of the new route being added. Address Network The network mask of the new route being added. Mask Gateway The network address of the default gateway. page 30 innovaphone IP DECT...

  • Page 31: Configuration/Ip/Ppp State

    The associated network mask. Mask Gateway The IP address of the default router. Interface Displays the interface on which the route was created. Possible ETH0 ETH1 PPP0-31, Local ISDN. interfaces are: Down. State Possible states are: innovaphone IP DECT Page 31...

  • Page 32: Configuration/Eth0-1

    Configuration/ETH0-1/DHCP Server chapter " ”. DHCP Client mode Client , the device receives its IP configuration from a DHCP server to whose network the device is connected. page 32 innovaphone IP DECT...

  • Page 33: Configuration/Eth0-1/Ip

    Ethernet segment, which do not have a cor- rect routing entry, to communicate over the device and use the WAN connection. To allow dial-in access to the entire network, Proxy ARP function must be enabled. innovaphone IP DECT Page 33...

  • Page 34: Configuration/Eth0-1/Nat

    IP network area that should not be included in the Network Mask Address Translation. 4.1.3.5 Configuration/ETH0-1/VLAN If a network uses several VLANs (Virtual Local Area Network), a VLAN can be specified for every Ethernet interface . This ensures that the data packets are page 34 innovaphone IP DECT...

  • Page 35: Configuration/Eth0-1/Dhcp Server

    Service) off according to 802.1q. Priority If the switch at the port to the innovaphone gateway happens to be configured to a different ID, the same value must be entered here to allow the Ethernet packets to be prioritised. A priority va- lue between 0 and 7 is entered here (configuration on the Ether- net switch).
  • Page 36 Dial Tones * The dial tone that is transmitted as the standard dial tone to German PBX the VoIP telephones (for example, = as German PBX, = US dial tone, = British dial tone). page 36 innovaphone IP DECT...
  • Page 37 LDAP configuration. Update All devices integrated via DHCP are assigned the interval spe- Interval cified here in the Interval [min] field of the update server [min] (see chapter entitled “Configuration/General/Update”). innovaphone IP DECT Page 37...

  • Page 38: Configuration/Eth0-1/Dhcp Leases

    0. The VLAN ID with the value 0 switches QoS (Quality of Service) off according to 802.1q ab. If the switch at the port to the innovaphone device happens to be configu- red to a different VLAN ID, the same value must be specified here to allow a prioritisation from the Ethernet.

  • Page 39: Configuration/Eth0-1/Statistics

    The number of successfully received packets. rx-unicast The number of successfully received unicast packets. rx-broad- The number of successfully received broadcast packets. cast innovaphone IP DECT Page 39...

  • Page 40: Configuration/Ldap

    The total number of sent and received packets of 1024 Bytes. 4.1.4 Configuration/LDAP The LDAP server and replicator configuration can be performed here. The LDAP server makes the local LDAP database available to external clients. page 40 innovaphone IP DECT...

  • Page 41: Configuration/Ldap/Server

    4.1.4.3 Configuration/LDAP/Replicator LDAP replication can be configured here. The task of LDAP replication is to copy and keep up to date the entire content or parts of the user database of a remote innovaphone PBX. innovaphone IP DECT Page 41...

  • Page 42: Configuration/Ldap/Replicator-Status

    Displays the state of the replication in push direction. Number of locally added objects. Number of locally deleted objects. modify Number of locally modified objects. notify Number of notifications that have arisen locally. pending Number of locally waiting objects. page 42 innovaphone IP DECT...

  • Page 43: Configuration/Pri1-4 & Tel

    Switches the interface of the transmit line with that of the receive line. 100 Ohm Termi- Turns on 100 Ohm bus termination. nation Supply Inline A checked check box turns on the power supply for the Power relevant interface. innovaphone IP DECT Page 43...
  • Page 44 If you enable the CAS method, the content of chapter “ Protocol ” changes. No CRC4 * A checked check box disables the Cyclical Redundancy Check. No check value is then generated when transmit- ting data via the relevant interface. page 44 innovaphone IP DECT...

  • Page 45: Configuration/Pri1-4 & Tel/Protocol

    The gateways therefore support two different variants. QSIG ECMA1 Numbering of the channels from 1-30 (2 bytes) QSIG ECMA2 Numbering of the channels from 1-15, 17-21 (2 bytes) innovaphone IP DECT Page 45...

  • Page 46: Configuration/Pri1-4 & Tel/Interop

    IEs from the transmitted messages. Suppress Sen- No high layer compatibility information elements ding of HLC are transmitted. Suppress Sen- No facility information elements are transmitted. ding of FTY Suppress Sub- No subaddress information elements are transmit- address ted. page 46 innovaphone IP DECT...

  • Page 47: Configuration/Pri1-4 & Tel/State

    In the State submenu, you can display the state of the ISDN or PPP interface. The individual columns are explained in the following table. Physical State Displays the current state of layer 1 (physical layer). Pos- sible states: Up, Down innovaphone IP DECT Page 47...

  • Page 48: Configuration/Pri1-4 & Tel/Statistics

    This includes, for example, the registration of VoIP telephones with a gateway or, if available, an innovaphone PBX. 4.2.1 Administration/PBX This menu is only visible if an innovaphone PBX licence is available (see chapter entitled “Configuration/General/Licence”). page 48 innovaphone IP DECT...

  • Page 49: Administration/Pbx/General

    4.2.1.1 Administration/PBX/General The innovaphone PBX can be administered here. Off, Master Slave Standby PBX Mode The PBX mode 1. Off - The PBX is disabled. Master - Operates the PBX on this device as the mas- ter. Where several PBXs are operated in combination, there must be one PBX configured as the master.
  • Page 50 The Licences section provides you with a brief overview of the available PBX licences and those that have already been allocated: Registrations Registration licences. Operators Operator licences. SoftwarePhones SoftwarePhone licences. PBX6# PBX basic licences. PBX6# PBX basic licence upgrades. page 50 innovaphone IP DECT...

  • Page 51: Administration/Pbx/Password

    You must repeat the entry of the PBX password. 4.2.1.3 Administration/PBX/Filter In the innovaphone PBX, it is possible to define global call filters. In this way, various rights for phoning can be assigned to, or withdrawn from, the users. Name The descriptive name of the filter.

  • Page 52: Administration/Pbx/Objects

    Result: As in example 1, with the exception that, here, national calls to Austria and to Switzerland may be made. In the IP Filter section, you can define global IP address filters to protect the innovaphone PBX from unauthorised access: Address The network address to be filtered.
  • Page 53 To add a new object, you must select the relevant object and then click the link beside the PBX objects list box. Depending on which object was selected in the list box, the page setup of the subsequent popup changes. This popup page innovaphone IP DECT Page 53...
  • Page 54 A filter can also be selected for call forwarding should this Administration/PBX/Filter Filter take place (see chapter entitled “ ”). CFNR The time set here (in seconds) is the interval that elapses Timeout before a user’s call forwarding is initialised. page 54 innovaphone IP DECT...

  • Page 55: User Object

    If call groups have already been created, you can select them Indicati- here and add them to new objects. The object-specific entry fields are displayed accordingly as an extended section. Below is an overview of all possible objects in the innovaphone PBX: 4.2.1.4.1 User Object: User...
  • Page 56 5011. Note that the manual override should always be viewed in relation to the initial state. Weekday Here, you specify the time condition for the decision true true false + Time ) or ( Specifica- tion page 56 innovaphone IP DECT...

  • Page 57: Call Broadcast Object

    4.2.1.4.4 DECT System Object DECT System To be able to register a DECT system in the innovaphone PBX, a DECT Sy- PBX object is required. All DECT-specific information is stored in this stem PBX object.

  • Page 58: Dtmf Features Object

    All calls to the boss are sent to the primary secretary. If no registration exists for the primary secretary, then the calls are forwarded to the secondary secretary. All calls to the secretary groups are signalled as a diverted call, with the boss displayed as the call diverter. page 58 innovaphone IP DECT...

  • Page 59: Gateway Object

    Multicast The following specifications are made in the section: Multicast A multicast IP address must be specified. For IPv4, the multi- Address cast address range 224.0.0.0 to 239.255.255.255 applies. innovaphone IP DECT Page 59...

  • Page 60: Message Waiting Object

    (voicemail) must be prompted to send the cur- rent status for the individual user to the innovaphone PBX via H.450.7. The H.323 SETUP message must also be sent the call number of the relevant subscriber, or otherwise the PBX does not know which subscriber the MWI message should be sent to.

  • Page 61: Number Map Object

    The call number (Number) represents the prefix of the location. If a PBX object was defined, the menu set-up for the objects is extended through the ad- Node Local dition of the entry fields. innovaphone IP DECT Page 61...

  • Page 62: Trunk Line Object

    4.2.1.4.12 Trunk Line Object: Trunk Line PBX object represents the trunk line in the innovaphone PBX. To Trunk Line register an ISDN trunk line with the PBX object, an H.323 registration with specification of the gatekeeper ID and call number simply has to be activa- Administration/ ted on the interface with connected trunk line (see also chapter “...
  • Page 63 PBX object must be possible. A dial tone is played at this point only with a connected ISDN trunk line. Suffix dialling digits are accepted. 3. To simulate a dial tone for least cost scenarios, for example (see also the innovaphone IP DECT Page 63...

  • Page 64: Voicemail Object

    4.2.1.4.14 Waiting Queue Object: Waiting Queue PBX object represents a waiting loop in the innovaphone PBX. When a call is received on this object, an audio file stored on a HTTP server is played back. The following specifications are made in the Queue section:...
  • Page 65 Alert The music on hold or announcement is played after the time interval specified here has elapsed. Round Timeout before a switchover to the next subscriber. Robin Primary Group Primary Time interval for the innovaphone IP DECT Page 65...

  • Page 66: Administration/Pbx/Registration

    This is advantageous for diagnostic purposes in particular, since the existence of possible network problems, for example, is immediately visible (see Media). Subscriber A: Number Display of the calling number. Name Display of the calling name. Protocol Display of the protocol used on the calling side. page 66 innovaphone IP DECT...

  • Page 67: Administration/Gateway

    HTTP interfaces, the analogue interfaces (TEL), as well as the ISDN inter- faces (TEL, PPP, BRI or PRI). With the use of additional licences, so-called VoIP interfaces (GW1-12) are also available, which enable the linking of PBXs without using the innovaphone PBX, for example. innovaphone IP DECT Page 67...

  • Page 68: Administration/Gateway/General

    Using Feature Codes, further features are made available to the VoIP telepho- nes. The codes for these features can be configured. Here, it is to be noted: • that the “$” character stands for a variable number of characters (for example, a telephone number) and page 68 innovaphone IP DECT...
  • Page 69 *33*$# Activates/deactivates the phone’s keylock. Unlock #33*$# The „$“-character stands for the PIN. Restrict access for unauthorised users. With this function the protection can be activated and the PIN can be setted.: Activity Code Description innovaphone IP DECT Page 69...
  • Page 70 Do not No internal calls are put through if the Disturb Int. check box is checked. *421# #421# Do not No external calls are put through if the Disturb Ext. check box is checked. *422# #422# page 70 innovaphone IP DECT...
  • Page 71 R*16$(1) With , a call can be parked by pressing the R key and then entering the Feature Code (1 = position on own extension). Unpark Unpark #16$(1) With , it can be retrieved again. innovaphone IP DECT Page 71...
  • Page 72 The Licences section provides you with a brief overview of the available device depended licences and those that have already been allocated: Gateway Gateway licences. Gatekeeper6 Gatekeeper licences. BRIs BRI interfaces. PRIs PRI interfaces. Channels DSP channels. AB-interfaces. Registrations Registratios-licenses. page 72 innovaphone IP DECT...

  • Page 73: Administration/Gateway/Interfaces

    The interface can be configured as a point-to-point con- Point-to-Point nection ( ), as a point-to-multipoint connec- Point-to-Multipoint Manual tion ( ) or manually ( ) using CGPN/CDPN maps. See description further down in the text. innovaphone IP DECT Page 73...
  • Page 74 Trunk Point-to-Multipoint is selected, the Interface Maps Point-to-Multi- point section is displayed: MSN1-3 / Ext. For every ISDN basic access, several call numbers can be configured. The innovaphone-Gateways support up to MSN1-3 three multiple subscriber numbers ( ), followed by Ext.
  • Page 75 Code Manipulation). Calls from one interface to another interface are then handled directly over the ISDN PCM bus, which in turn saves DSP channels. This entry field is optional and is displayed only in particular devices. Registration section: innovaphone IP DECT Page 75...
  • Page 76 ( ) or not ( Administra- See also description in the chapter entitled “ tion/PBX/Objects ”. page 76 innovaphone IP DECT...
  • Page 77 Likewise in this protocol, a call number is required for the registration, which corresponds to the part in front of the @ of the URI (for example, 8111111e0). Password / The password (Password) of the SIP Account must be Retype specified and confirmed (Retype). innovaphone IP DECT Page 77...
  • Page 78 Registration for H.323 After selection of H.323, the sec- tion is displayed, enabling registration of a SIP Account with a local PBX (for example, innovaphone PBX). Registration for SIP After selection of SIP, the section is displayed, enabling in turn registration with a local SIP PBX (for example, innovaphone PBX).

  • Page 79: Cgpn/Cdpn Mappings

    If a call is received on this interface, music on hold, an announcement or some other spoken information is played from a Web server. The configuration only makes sense in combination with the innovaphone PBX. 4.2.2.2.2 CGPN/CDPN Mappings...

  • Page 80: Administration/Gateway/Voip

    The name of the interface. Clicking this name opens a popup page, on which all settings can be made. The set- tings are described in more detail in the following chap- Administration/Gateway/VOIP/Interface (VoIP ter “ interfaces) ”. page 80 innovaphone IP DECT...

  • Page 81: Interface (Voip Interfaces)

    5. ENUM - Is used to register an ENUM connection with the relevant interface. Gatekeeper The primary Gatekeeper IP address at which the terminal Address (pri- or gateway is to register via the relevant interface. Only mary) necessary for modes 2 and 3 . innovaphone IP DECT Page 81...
  • Page 82 The standard entry fields in the Coder Preferences section were already des- Administration/Gateway/Interfaces/Interface (physical and cribed in chapter “ virtual interfaces) ”. In addition to the standard fields, several advanced settings are available in the page 82 innovaphone IP DECT...

  • Page 83: Cgpn/Cdpn Mappings

    The most important task of the gateway is call routing. It determines which calls are accepted and where they are switched to. Call routing is carried out by the gateway's gatekeeper and is controlled by routes innovaphone IP DECT Page 83...

  • Page 84: From - To

    This popup page also contains the specification of the map entries. Add Map above/below Clicking the buttons opens the same popup page and adds a map entry at the relevant place. This popup page is structured page 84 innovaphone IP DECT...
  • Page 85 The destination interfaces available RT, RS TEST TONE HTTP face in principle are: MAP and DISC Name Out If the H.323 call name is to be changed, the new call name can be entered here. innovaphone IP DECT Page 85...
  • Page 86 A checked check box enables translation of H.323 or SIP to king (QSIG) QSIG. Here, no translation from QSIG to H.323 or SIP takes place, rather, the transmission is transparent (is used where PBXs of the same kind are linked via VoIP). page 86 innovaphone IP DECT...

  • Page 87: Cgpn Maps

    >) in the CGPN Maps column can be used to define and edit such maps. Number In The calling number. The CGPN map is valid if the inbound E.164 call number matches the call number or dial prefix set here. innovaphone IP DECT Page 87...

  • Page 88: Administration/Gateway/Cdr0-1

    In the Address field, you enter the IP address of the syslogd server. • In the Class field, you enter the desired message class that will be responsible for further processing of the CDR entries. page 88 innovaphone IP DECT...

  • Page 89: Administration/Gateway/Calls

    Jitter = Latency time (time interval from the end of an event up to the start of the response). Loss = Number of lost packets (packet loss). Number Display of the called number. Alerting, Calling, Connected, Disconnecting State Possible states: innovaphone IP DECT Page 89...

  • Page 90: Administration/Download

    There are several ways to update the VoIP device. Note Detailed informations respectively the status display by the Ready LED while uploading files to the device can be found in the innovaphone knowledge- How to Reset IPXXX , factory default, led behaviour, tftp base article „...

  • Page 91: Administration/Upload/Firmware

    Configuration/General/Update in the chapter “ ”. New firmware versions can be obtained from a certified innovaphone dealer or directly via the innovaphone ho- mepage (http://www.innovaphone.com). By specifying path and file name of the configuration file to be loaded in the Firmware File field and then clicking the Upload button, the configuration file is loaded into the device.

  • Page 92: Administration/Diagnostics

    All DECT radio connections – only visible for IP DECT radio systems. H.323 All H.323 registrations. Registrati- SIP Regi- All SIP registrations. strations Config All configuration changes. Changes TEL1-n All TEL1-n connections – only visible for devices with TEL interface. page 92 innovaphone IP DECT...

  • Page 93: Administration/Diagnostics/Tracing

    Information on the PPP interface. TEL1-n Information on the TEL1-n interface. BRI1-n Information on the BRI1-n interface. PRI1-n Information on the PRI1-n interface. prot The prot check boxes after the individual interface settings give information on the protocol used. innovaphone IP DECT Page 93...
  • Page 94 Information on the PPTP protocol. PPoE0-1 Information on the PPoE0/1 protocol. DHCP0-1 Information on the DHCP0/1 server. HTTPCLI-- Information on the HTTP client. HTTPCLI-- Detailed information on the HTTP client. ENT ver-- bose Clicking saves the settings made. page 94 innovaphone IP DECT...

  • Page 95: Administration/Diagnostics/Config Show

    “ inside Indicators and Connectors Reset Table 1 „ “ („ “). More detailed informations can be found in the innovaphone knowledgebase How to Reset IPXXX , factory default, led behaviour, tftp mode,clear article „ config,gwload “ (http://www.innovaphone.com/inno-kb/). innovaphone IP DECT...

  • Page 96: Administration/Idle Reset

    With a TFTP Reset, the VoIP device is transferred to TFTP mode. In this mode, the device can only be accessed with the GWLoad tool and thus allocated an IP address. Further information on the innovaphone GWLoad tool may be found in the innovaphone Knowledgebase.

  • Page 97: Appendix A: Connectors And Control Elements

    Appendix A: Connectors and control elements Indicators and connectors 2 3 4 Fig. 1 - Indicators and connectors of the IP6000 Pos. Symbol Description and function PRI1-4 ISDN-Socket (primary-rate-interface) for connecting an ISDN device. ISDN-Socket (basic-rate-interface) for connecting an ISDN device or terminal equipment.
  • Page 98 ISDN-LEDs. The device will go into TFTP-Mode and the Ready-LED will be displayed in orange. Power-Cycle: Means to disrupt the device from the power supply. Works technically and visually like the short reset. Table 1 Indicators and connectors of the IP6000 page 98 innovaphone IP DECT...

  • Page 99: The Serial Number Label

    Fig. 2 - Serial number label of the IP6000 The MAC address is also the serial number of the IP6000. The first three constant hexadecimal digits separated by a hyphen (`-´) are innovaphone’s manufacturer identification code (009033 or 00-90-33), whilst the last three hexadecimal digits (08ffff or 08-ff-ff) are the consecutive serial number of the IP6000.

  • Page 100: Appendix B: Troubleshooting

    Make sure that the exclusive“ remote VoIP device, channel cannot „ check box is but no voice be set up, since disabled. connections can be the two VoIP established. devices do not have a common voice encoder. page 100 innovaphone IP DECT...

  • Page 101: Nat And Firewalls

    VoIP devices can be this purpose. established. NAT and • See chapter “ firewalls ” for more information. Table 2 Troubleshooting NAT and firewalls If there is a firewall protecting your network from the Internet and connections innovaphone IP DECT Page 101...
  • Page 102 The number of ports to be released can be restricted if the H.323 devices whose data is to cross the firewall are all innovaphone devices. The following ports must be released in both directions: •...

  • Page 103: Voip And Heavily Loaded Wan Links

    In this case, you will not be able to set up any voice connections from within the network to the device (for example, with innovaphone Softphone PCs). If the network is operated in NAT mode and the product you are using does not support H.323 NAT, then it is not possible to operate beyond the firewall.
  • Page 104 This can result in poor quality in spite of prioritisation. In such a case, you should check whether this interruption can be separately enabled. Some routers refers to this function, somewhat confusingly, as interleaving. page 104 innovaphone IP DECT...

  • Page 105: Anhang C: Isdn-Errorcodes

    No answer from user (user aler- ted) 0x15 0x95 Call rejected 0x16 0x96 Number changed 0x1A 0x9A Non-selected user clearing 0x1B 0x9B Destination out of order 0x1C 0x9C Invalid number format 0x1D 0x9D Facility rejected 0x1E 0x9E Response to STATUS ENQUIRY innovaphone-Gateway Seite 105...
  • Page 106 0xC2 Channel type not implemented 0x45 0xC5 Requested facility not implemen- 0x46 0xC6 Only restricted digital informa- tion bearer capability is available 0x4F 0xCF Service or option not implemen- ted, unspecified 0x51 0xD1 Invalid call reference value Seite 106 innovaphone-Gateway...
  • Page 107 Information element non-exi- stent or nor implemented 0x64 0xE4 Invalid information element con- tents 0x65 0xE5 Message not compatible with call state 0x66 0xE6 Recovery on timer expiry 0x6F 0xEF Protocol error, unspecified 0x7F 0xFF Interworking, unspecified innovaphone-Gateway Seite 107...

  • Page 108: Appendix D: Support

    The innovaphone homepage (http://www.innovaphone.com) contains all current service packs, boot codes, hot fixes, firmware updates, manuals, datasheets, etc. It is also possible to request the innovaphone newsletter to stay up to date with current innovaphone news. In future, it will be possible to make complaints online via the innovaphone homepage.

  • Page 109: Appendix E: Configuration Of The Update Server

    It is possible to update the firmware and configuration of a large number of innovaphone devices in a distributed environment by automated means. This is done by storing the configuration and firmware information on a standard Web server, which in turn is called up the individual devices.

  • Page 110: Running Maintenance

    Note here that the URL parameter must point precisely to the location of the file with the contained maintenance commands. It is also to be noted that this URL (just like all other URLs used by innovaphone devices) does not support host names. Therefore, a valid IP address always has to specified.

  • Page 111: Time Command

    (or empty if the device was reset with the standard settings) called UPDATE/CHECK. The check command compares the content of <serial> with the UPDATE/CHECK variable. If both match, all further processes of the maintenance file are terminated.
  • Page 112 This command downloads new firmware (if available) from the specified URL onto the device. Finally, the <final-command> is executed. innovaphone devices have an internal variable that is initially empty (or empty if the device was reset with the standard settings) called UPDATE/PROT. The prot command compares the content of <build-serial>...
  • Page 113 A Web server exists at the address 192.168.0.10 with a subdirectory called configs. In this directory, there are two further subdirectories, in which the current firmware files for all innovaphone devices are stored. Clients provide the DHCP server with the option #215 as http://...
  • Page 114 In addition, two standard functions were programmed for the device. IP3000 devices are updated to firmware version 04-5679 in the time period 23:00 hrs to 04:59 hrs. page 114 innovaphone IP DECT...

  • Page 115: Appendix F: Configuration Of An Ntp Server/Client

    Any Windows server can operate as the NTP server. Equally, there are various NTP software packages for Windows and Unix/Linux platforms. The innovaphone VoIP devices also work simultaneously as NTP servers. If several devices are being used, one device can synchronise with a time server (external if need be), and all other devices, in turn, can synchronise with this one device.
  • Page 116 The format for a time entry is hh[:mm[:ss]], in the 24-hour format. The Central European time zone which applies to Germany is specified as follows: CET-1CEST-2,M3.5.0/2,M10.5.0/3 Further information on the POSIX standard can be called up on the Web at http://standards.ieee.org/catalog/olis/posix.html. page 116 innovaphone IP DECT...

  • Page 117: Appendix G: Instructions For Downloading Licences

    Login The login screen is then displayed. If no licences have yet been downloaded from innovaphone, the Help pages should be readed first. Otherwise, enter a valid e-mail address in the E-mail field and a relevant password in the Password field.

  • Page 118: Appendix H: Glossary

    Appendix H: Glossary This glossary relates to all innovaphone gateways, including innovaphone DECT gateways: A-law The A-law method is a method for the dynamic compression of audio signals, which is described in the ITU G.711 recommendation. The dynamic compression improves the signal-to-noise ratio under equivalent transmission conditions.
  • Page 119 IP master). All other DECT radios are controlled by it. The DECT radio in this master IP1200 can be used (usually it is used as a normal DECT radio; only if the IP DECT system uses more than 64 base stations, should innovaphone gateway Page 119...
  • Page 120 Reference). For outbound connections, it is allocated by the terminal, for inbound connections by the network. CTI (Computer Telephony Integration) is a value-added service for raising efficiency in voice transmission. With this service, very simple applications, such as computer-aided call number dialling, through to complete call Page 120 innovaphone gateway...
  • Page 121 DECT base station A DECT base station can set up a voice channel between an IP DECT telephone and the innovaphone PBX. DECT controller Short for CCFP (Central Controller Fixed Part).
  • Page 122 Internet, and defines how a telephone number is mapped on a domain address. The telephone numbers are integrated in the DNS (Domain Name System). For the conformance of the telephone numbers to the Page 122 innovaphone gateway...
  • Page 123 DECT GAP fixed part and portable part. This profile has been established by ETSI as an important part of a set of DECT profiles. Every DECT device must support one or more profiles to be functional. innovaphone gateway Page 123...
  • Page 124 VoIP. Real-time communication in LANs is defined using this standard. The H.323 standard consists of a whole series of protocols for signalling, the Page 124 innovaphone gateway...
  • Page 125 DECT system. IP master The IP1200 that controls all other DECT base stations in an IP DECT system is often referred to as the IP master. It is possible that it is the same DECT innovaphone gateway Page 125...
  • Page 126 It is normally implemented as a diffusion network and achieves transfer rates of up to 10 Gbit/s (10 Gigabit Ethernet). LANs can be wired (like the Page 126 innovaphone gateway...
  • Page 127 (international version) and a 128-bit key length (US version). Data encoding is based on RSA 4 Stream Cipher (RC4). In the case of the 128-bit key, a 64-bit part of the key is changed for each new session to raise innovaphone gateway Page 127...
  • Page 128 Therefore, a NAT device with two network adapters can connect the local private network with the Internet, for example. NAT is divided into two Page 128 innovaphone gateway...
  • Page 129 The OSI model has been developed since 1979 and has been standardised by the ISO. It is used as the basis for a series of manufacturer-independent network protocols, which are used almost exclusively in the transport innovaphone gateway Page 129...
  • Page 130 8-wire Ethernet cable. POSIX POSIX (Portable Operating System Interface for UniX) is a standardised application-level interface jointly developed by the IEEE (Institute of Electrical and Electronics Engineers) and the Open Group for Unix. It Page 130 innovaphone gateway...
  • Page 131 64 kbit/s are available to the end-user via the S2M interface. QoS (Quality of Service) refers to all procedures that influence the data flow in LANs (Local Area Networks) and WANs (Wide Area Networks) so that the innovaphone gateway Page 131...
  • Page 132 PBX. A repeater increases the coverage area of the IP DECT system, but not the maximum possible number of calls made simultaneously. A repeater requires a synchronisation source (just like every other DECT radio). The DECT radio used as the synchronisation chain is likewise used to Page 132 innovaphone gateway...
  • Page 133 The round trip time is used in some routing algorithms to determine the optimum route. RSA (Rivest Shamir Adleman) is an asymmetric method or algorithm for encrypting discrete data, which uses various keys for encrypting and innovaphone gateway Page 133...
  • Page 134 Rather a small set of data is transferred, which allows the generation of background noise on the receiver side. CFG (Comfort Noise Generator) starts precisely at this point. It is capable of generating background noise independently. For this, it uses the background Page 134 innovaphone gateway...
  • Page 135 One could also say the next DECT radio in the synchronisation chain. For redundancy, an “Alt sync master” can be configured. This is used as the synchronisation source if the DECT radio configured as the “Sync master” is innovaphone gateway Page 135...
  • Page 136 8-bit-per-byte-oriented communication. It is usually used to offer users access to Internet computers via the command line. Here, the Telnet program provides the required client functions of the protocol. However, because there is no encryption, it is hardly used any Page 136 innovaphone gateway...
  • Page 137 Uniform Resource Locator refers to a subtype of Uniform Resource Identifiers (URI). URLs identify a resource via its primary access mechanism innovaphone gateway Page 137...
  • Page 138 The term VPN (Virtual Private Network) is used with different meanings. Very generally, one refers to a VPN if customer-specific, logical subnetworks are being created within a public switched network. They may be networks for voice communication, or X.25, Frame Relay or ISDN networks. The usual Page 138 innovaphone gateway...
  • Page 139 WINS server. When a client logs off, the address is released again and can be reassigned. WRFP WRFP (Wireless Radio Fixed Part) is used as a synonym for repeater. innovaphone gateway Page 139...

  • Page 140: Keyword Index

    Keyword index AC (Access Code) Symbols Account Acknowledged µ-law Action Numerics Active Calls Adapt to Cisco PPP peers 24, 36, 103 0x10 Add # 10 MBit Full Duplex Add UUI 10 MBit Half Duplex 52, 61, 88, 89 Address Address Ranges 100 MBit Full Duplex 12, 17 Administrator access...
  • Page 141 Authentication Call Counter max 68, 88 Authentication trap Call detail records Authorization Call direction Auto Call Executive Auto dial after boot Call filter Automatic Call Logging 68, 86 Automatic CGPN Mapping Call routing 12, 118 Auto-MDX Call switching Autonegation Called Party Number 67, 89 Calling Calling Party Number...
  • Page 142 58, 120 Configuration of the VoIP device CFU Activate Connect message 67, 89 CGPN Connected 73, 80, 81 CGPN In Connection Port CGPN map Connections CGPN Maps Connectors and control elements 73, 80, 81 CGPN Out Contact Channel Associated Signalling Coordinated world time Channels Check command...
  • Page 143 84, 85 Destination interface Disposal Destination Network Diversion Filter Device configuration DMS100 Device Name 17, 23 33, 36 Device name DNS server DHCP DNS Server 1 12, 13, 33 DHCP Automatic mode DNS Server 2 32, 33 DHCP client Do not Disturb Ext. On DHCP Client mode Do not Disturb Int.
  • Page 144 Enable PCM Final Route Enable T.38 Firewall Enable Telnet Firmware 37, 87 en-bloc dialling Firmware download 108, 112 Enblock Count Firmware update Enblock Dialling Timeout Firmware upload 81, 122 91, 108, 112 ENUM Firmware version 13, 31, 32 ETH0 First Address 13, 31, 32, 97 ETH1 First UDP NAT port / numbers of port...
  • Page 145 36, 76, 81, 26, 103 Gatekeeper IP address H.323 NAT 76, 92 H.323 registration 68, 72 Gatekeeper licence H.323 terminal Gatekeeper/Registrar H.3245 faststart Gatekeeper6 Handover 30, 31, 34, 53, 55, 67, Gateway Handset Hardware ID Gateway configuration Hardware version Gateway licence HDLC Gateway setting Hexadecimal number...
  • Page 146 ISDN PPP interface innovaphone knowledgebase ISDN TEL interface innovaphone news ISDN U law standard 41, 49, 51 innovaphone PBX innovaphone PBX licence Insert Route below 67, 89, 126 Jitter Installation and connection 31, 73, 80, 89 Interface Interface Maps...
  • Page 147 31, 42, 54 53, 60 Local Message Waiting Local flag 23, 127 Local Subscriber Number 23, 42, 53 Location Check Interval 77, 78 19, 20 Locked White List Interval 22, 89, 92 Log message Lease Time Log type Mode 21, 92 Logging Model 52, 54, 66...
  • Page 148 30, 31, 33, 34, 35 Network Mask Network routes Object type 21, 70, 71, 88 Network Time Protocol Network-specific Offer Parameters Offset Newsletter Next (ok/nok/filter) Operating modes 23, 92 Operating state 13, 129 Nmblookup Operating temperature 53, 66 Operating time No Answer Timeout Operator licence No CRC4...
  • Page 149 20, 88 PBX master Port PBX Mode Port-specific Forwardings PBX Name POSIX PBX Object POSIX timezone strings 4, 12 PBX object: Boolean Power over Ethernet 4, 12 PBX object: Call Broadcast Power supply PBX object: DECT System 26, 74, 78, 92, 93, 131 PBX object: DTMF Features PBX object: Executive PPP connection...
  • Page 150 Public Repeater Push direction Repeater chain Replication connections Replicator status Q value Reply from Q0.931 Require authentication 38, 131 Reroute supported QSIG Reserve IP Address Quality of service Reserved Queue 91, 96, 98 Reset Reset button Radio Reset required RAS protocol Reset when idle Restart Read...
  • Page 151 Secondary Gatekeeper Running maintenance Selective direct outward dialling Send flags on FDL 16, 99 Rx-abandon Serial number 20, 32, 42 Rx-add Server Rx-align-err Server Address Rx-broadcast Server Address (primary) Rx-collision Server Address (secondary) Rx-crc-err Server status Rx-del Service packs Rx-errors Set Calling = Diverting No 39, 48 Rx-good...
  • Page 152 Standard configuration Sync Standard file name Sync master Standard firmware file name Sync source 20, 115, 135 Standard MIB II Synchronisation Standard router Synchronisation chain 111, 112 22, 88, 92 Standard settings Syslog 22, 88 Standard user name Syslog daemon Standard user password Syslog entries Standby mode...
  • Page 153 TFTP-Mode Tunneling Time Twisted pair cable Time command Time condition Tx level for T1 mode Time format Tx-broadcast Time Server Tx-collision 20, 36, 115 Time server Tx-deferred Time service Tx-error Time stamp Tx-error-49 16, 20, 36 Time zone Tx-error-50 Timezone Tx-excesscol 36, 115 39, 48...
  • Page 154 Update Server URL Waiting Queue 90, 91 Upload Waiting Queue Object Uptime WAN connection 19, 21, 38, 49, 89, 110, WAN links 112, 137 Warm start URL parameter Waste Electrical Electronic User Equipment 22, 89, 109 User & Password Web server User database WEEE guidelines User interface...

Table of Contents