Phonebook Management; Dial Back From Phonebook List; Store A Number Into The Phonebook; Store A Number On The Hot Dial Memory Buttons - Uniden SSE33 Owner's Manual

Hide thumbs Also See for SSE33:

Owner's manual (24 pages)

Table Of Contents

Table of Contents

You can store up to 30 phonebook entries in the telephone memory, with

maximum of 22 digits for number and 16 characters for name. When the

phonebook memory is full and if you want to add another entry, the LCD will

display, 'MEMORY FULL'. You must delete one phonebook entry, then add new

phonebook entry.

In the standby mode, press CID/BOOK button to switch between Caller ID list

and phonebook list. While phonebook list

UP and DOWN button to view the phonebook list. Phonebook entry sequence

number is also displayed.

Dial back from phonebook list

While viewing a phonebook number , press OK/DIAL button to directly dial the

number out on speakerphone mode.

store a number into the phonebook

Press MENU and select STORE NUMBER. Then press OK/DIAL button to

enter the number. The cursor flashes on the LCD, key in the number (up to 22

digits), press OK/DIAL button again. The cursor flashes again on the LCD, input

characters (up to 16 characters). Then press OK/DIAL button to confirm and

save.

If you press OK/DIAL button, SAVED is displayed on the LCD and the unit

announces 'Saved' and 'Name Recording'. To record voice, press and hold the

OK/DIAL button, speak clearly into the microphone after a beep and when the

VOICE icon flashes on the LCD. Release the button when you have finished or

the unit will stop recording after 3 seconds. The voice prompt will then be played

back automatically.

# Recording the voice is necessary for the personalized Caller ID with voice

prompt and a voice guide phonebook feature.

store a number on the hot Dial Memory Buttons

Press MENU and select the option STORE NUMBER, press OK/DIAL button

to key in the relevant number (up to 22 digits) and press OK/DIAL button to

confirm. Press HOT Dial Memory buttons 1 or 2, then press OK/DIAL button

again, the LCD will display 'SAVED' to indicate storing success.

When you want to make a call using the HOT Dial Memory buttons, pick up

handset or press the speaker button to get the line, and then press the relevant

HOT Dial Memory button.