Positioning The Speakers And Subwoofer; Mounting Rear Surround Speakers; Turning On The Unit And Tv; Power Cord Connection - Teac PL-D1620M Owner's Manual

E. Positioning the speakers and subwoofer
FRONT SPEAKERS
Place on both sides of the TV,
equal distances apart.
SUBWOOFER
Can be placed anywhere.

Mounting rear surround speakers

1) Mark the correct mounting position on the wall.
2) Insert a fixing screw(s) at the marked position on the wall.
3) Align the slot hole(s) of the speaker over the screw and pull the speaker
downward until it is firmly hooked.

Turning on the Unit and TV

1)Press the STANDBY/ON power button to turn the Unit ON, or
2)Press the STANDBY/ON
the Unit while the Unit is in standby mode.
3)Turn on the TV by pressing its POWER button.
4)Select the channel on your TV corresponding to the VIDEO IN jack that the Unit is
connected to. See TV User guide for more information.
• If you have connected the Unit successfully, the DVD logo (start-up picture) will
appear on your TV screen.
Notes :
• Whenever no disc or disc stop for about 30 minutes, the system will be turned to POWER standby mode
automatically.
• The green LED of Standby will be turned on while the unit is at standby mode.

Power cord connection

• Make sure that all the components and speakers are connected correctly.
• Be sure the AC power cord is disconnected and all functions are off before making connections.
• When you are not going to use the Unit for a long period of time, disconnect the power cord.

Setup

button on the remote control or the FUNCTION button or the
CENTER
Place on the top of or below the TV.
REAR SPEAKERS
Place right beside or slightly
behind your listening position,
and a little higher than your ears.
- 18 -
PLAY button to turn on
(continued to next page) (continued to next page) (continued to next page) (continued to next page) (continued to next page)