Advertisement
Quick Links
Advertisement
Related Manuals for Ferm GRM1013
Summary of Contents for Ferm GRM1013
- Page 1 GRM1013 Original instructions WWW.FERM.COM...
- Page 2 Fig. 1 Fig. 2...
- Page 3 Fig. 3 Fig. 4...
- Page 4 Product information Fig. 1 Introduction 1. High pressure washer The high pressure cleaner GRM1013 is quick and 2. On/off switch efficient for cleaning vehicles, machines, boats, 3. Water inlet 4. wheel buildings, etc., by the removal of stubborn dirt using clean water and chemical detergents.
-
Page 5: Safety Instructions
Safety instructions minutes with the gun closed as this could When using electric machines always observe the damage the seals. safety regulations applicable in your country to • P rotect the cleaner from freezing during the reduce the risk of fire, electric shock and personal winter. -
Page 6: Assembly
• T he operating method to be followed in the or connected to a circuit that is regularly event of accident (e.g. contact with detergents: switched on and off by the utility. rinse with an abundance of clean water) or • T o ensure the machine safety, please only breakdown to prevent unsafe situations. use original spare parts (including nozzle) • T his machine has been designed for use with from the manufacturer or approved by the the cleaning agent supplied or recommended... - Page 7 store indoors while not in use.” Use only in order to clean clothes or footwear. extension cords having an electrical rating • D isconnect from the electrical power supply not less than the rating of the machine. Do before carrying out user maintenance. not use damaged extension cords. Examine • I f the mains cable is damaged it must be extension cord before using and replace if replaced by the manufacturer, or its service...
-
Page 8: Water Inlet
2. Unplug the unit from the power source. water or corrosive chemicals will damage 3. Turn off the water supply. the cleaner. 4. Press the trigger of the gun to depressurize the system. • Turn the motor switch to the “0” position. 5. Disconnect the garden hose from the pressure • C heck that the electrical supply voltage and washer. -
Page 9: Service & Maintenance
high pressure jet, keeping the nozzle at least 30 cm (10 in.) from the surface, working from • M ake sure that the machine is not live when the bottom upwards. Avoid allowing the rinsing carrying out maintenance work on the motor. water to run on to unwashed surfaces. • T o ensure good performance, check and clean • Shutting down the pressure washer the suction and detergent filters after every 50... - Page 10 ENVIRONMENT • Clean the water inlet filter • Pump sucking air from connections or hoses • Check that all supply connections are tight To prevent damage during transport, the • S uction/ delivery valves are clogged or worn appliance is delivered in a solid packaging which out. consists largely of reusable material. Therefore • C heck that the water feeding hose is not please make use of options for recycling the leaking.
- Page 13 Exploded view...
- Page 15 H.G.F Rosberg CEO FERM B.V. It is our policy to continuously improve our products and we therefore reserve the right to change the product specification without prior notice. FERM B.V. - Lingenstraat 6 - 8028 PM - Zwolle - The Netherlands...
- Page 16 1606-16 WWW.FERM.COM ©2016 FERM B.V.
Need help?
Do you have a question about the GRM1013 and is the answer not in the manual?
Questions and answers