Sony HCD-LS1 Service Manual page 17

DISC LOCK ARM SL
1 Apply sellotape to the disc lock SL ass'y as shown in
figure to prevent the disc lock from falling off while
removing the disc arm SL.
sellotape
INSTALLING THE DISC LOCK ARM SL
POSITIONING OF THE DISC LOCK ARM SL IS REQUIRED. (Refer to Fig. F. 2)
(1) Place the disc lock spring SL as shown in the figure.
(2) Insert the disc lock pinion into the hole on the disc lock arm SL.
(3) Adjust the position of the disc lock arm SL until its mark meets
the V-cut of the disc lock pinion as shown in the figure.
disc lock SL ass'y
(Fig. F. 1)
D lock spring SL
disc lock pinion
disc lock arm SL
(4) Insert the shaft hole of the disc lock arm SL into the shaft.
(5) Hook the end of the disc lock spring SL on the chassis hole as
shown in the figure.
(6) Reassemble the washer in place.
(7) Peel off the sellotape. Refer to Fig. F. 1.
(Fig. F. 2)
2 washer
3 disc lock arm SL
washer
17