Sony HCD-LS1 Service Manual page 14

OPTICAL PICK-UP KSS-540A
4 PU guide shaft SL
3 two SH lock plate SLs
3 two SH lock plate SLs
INSTALLING A OPTICAL PICK-UP KSS-540A
14
2 screw
(P2.6 × 3)
2 screw
(P2.6 × 3)
1. Connect the pick-up flexible board to the optical pick-up KSS-540A.
2. Open the laser diode shorting lands on the bottom of the optical pick-up KSS-540A.
Note: Use the soldering iron whose metal part
is grounded or a ceramic soldering iron.
pick-up flexible board
1 two screws
(P1.7 × 4)
6 optical pick-up KSS-540A
5 pick-up flexible board
Note: Before disconnecting the pick-up
(Fig. D)
flexible board from the optical pick-up
KSS-540A, short the laser diode
shorting lands on the bottom of the
optical pick-up KSS-540A.
Refer to Fig. D.