TP-Link Archer VR900 User Manual page 8

Chapter 1
LED
Power
DSL
Internet
Wireless 2.4GHz
Wireless 5GHz
LAN
USB
WPS
Note:
1. If the DSL LED or Internet LED is off, check your Internet connection first. Refer to
more information about how to make Internet connection correctly. If you have already made a right connection,
contact your ISP to make sure your Internet service is available now.
2. If the Internet LED is orange, check your Internet configuration. You may need to check this part of information
with your ISP and make sure everything have been input correctly.
Status
On System initialization complete.
System initializing or firmware upgrading is in process. Do not
Flashing
disconnect or power off the modem router.
Power is off. Please ensure that the power adapter is
Off
connected correctly.
On DSL synchronization is established.
Flashing DSL synchronization is in progress.
DSL synchronization failed. Please refer to
Off
troubleshooting.
White Internet connection is available.
No Internet connection or the modem router is operating in
Orange
Bridge mode. Please refer to
The DSL port is not connected or DSL synchronization failed.
Off
Please refer to
On The wireless 2.4GHz band is working properly.
Off The wireless 2.4GHz band is disabled.
On The wireless 5GHz band is working properly.
Off The wireless 5GHz band is disabled.
On At least one LAN port is connected.
Off No LAN port is connected.
On USB device is identified.
Flashing USB device identification is in progress.
Off USB device is unplugged or identification failed.
Turns On when a WPS synchronization is established and
On/Off
automatically turns Off about five minutes later.
A wireless device is trying to connect to the network via WPS.
Flashing
This process may take about 2 minutes.
Get to Know About Your Modem Router
Indication
for troubleshooting.
Note 2
for troubleshooting.
Note 1
Connect Your Modem Router
for
Note 1
for
4