Local Management - TP-Link Archer VR900 User Manual

Chapter 13
2 Go to Advanced
Management section.
3 Enter the old password. Enter the new password and enter again to confirm.
4 Click Save to make the settings effective.
13 5

Local Management

By default, local connected devices are allowed to manage the modem router over
HTTP. You can also enable local management over a more secure way, HTTPS.
Follow the steps below to enable local management over HTTPS:
1 Visit http://tplinkmodem.net, and log in with the password you set for the modem
router.
2
Go to Advanced
Management section.
3 Keep the Port as the default setting for management over HTTP.
4 Enable Management over HTTPS
5 Leave the IP/MAC Address
manage the modem router, you can enter the IP address or MAC address of the
device in this field.
> System Tools> Administration
> System Tools>
and keep the
field blank. If you just want to allow a specific device to
Administrate Your Network
page. Locate the
Administration page. Locate the
Port for HTTPS
Account
Local
as the default setting.
92