Power; Ground Connection - Bosch PLN-24CH10 Installation And User Instructions Manual

Plena 24 VDC Battery Charger | Installation and User Instructions | Equipment
3.3.6

Power

The charger is able to automatically use the power
source between 100 and 240 V. It is not necessary to
select the source voltage.
3.3.6. 1 Mains power
Do as follows to connect the battery charger to the
mains power:
1 Connect a locally approved mains cord to the
battery charger (see figure 3.6).
2 Connect the mains cord to a locally approved mains
outlet.
figure 3.8: Connecting the mains power
Bosch Security Systems | 2006-11 | 9922 141 50781 en
3.3.7

Ground connection

Caution,
Make sure the safety ground is connected to the
battery charger via the mains power cable.
Caution,
Do not make a separate ground connection to
the battery. The 24VDC connection is already
internally grounded in the Plena equipment.
Caution,
Do not make a separate ground connection to
the 24 VDC output. The 24 VDC output has a
common return (it is connected via the 0 V).
en | 15