Network Menu - Oki 2426 Series User Manual

Only appears if the network card is installed.
Item
TCP/IP
NETWARE
ETHERTALK
NETBEUI
FRAME TYPE
DHCP/BOOTP
RARP
IP ADDRESS
SUBNET MASK
GATEWAY
ADDRESS
PRINT
SETTINGS
INITIALIZE
Executive Series 2426 Printer Family User's Guide

Network Menu

The default settings are bold.
Value
Enable; Disable
Enable; Disable
Enable; Disable
Enable; Disable
Auto; 802.2; 802.3
Ether-II; Snap
Enable; Disable
Enable; Disable
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
ON; OFF
ON; OFF
Setting Up • 111
Description
Enable: Selects TCP/IP protocol.
Enable: Selects Netware protocol.
Enable: Selects EtherTalk protocol.
Enable: Selects NetBEUI protocol.
Enable: Selects the Ethernet frame
type.
Enable: DHCP/BOOTP is selected
automatically.
Enable: RARP is selected
automatically.
Configures IP address.
Uses 12 alphanumeric characters.
Configures subnet mask.
Uses 12 alphanumeric characters.
Configures gateway address
Uses 12 alphanumeric characters.
ON = When the printer exits Menu
Mode, the Network MenuMap prints.
The Network MenuMap shows the
results of self-diagnosis tests and the
current network printer settings.
ON = When the printer exits Menu
Mode, the network initializes.