Motorola APX 2000 User Manual page 95

Note: If the feature inactivity timer is enabled, your
radio automatically exits the feature when your radio
is left idle long enough for the time to expire. You
hear the Menu Inactive Exit Tone upon feature exit.
• Sending a call alert page via the preprogrammed
Quick Access (One-Touch) Call Alert Paging
button:
a) Press the preprogrammed Quick Access
(One-Touch) Call Alert Paging button to send
a page to the preprogrammed ID.
The display shows Paging...<Number>.
If the call alert page is sent successfully, you
hear a tone and the display shows Ack
received. The radio returns to the Home
screen.
If the call alert page is not acknowledged, you
hear a low tone and the display shows No
acknowledge. Press the Menu Select button
directly below Ok to return to the main screen
for Contacts.
•
Sending a call alert page via the radio menu Page:
a)
or to Page.
b) Press the Menu Select button directly below
Page.
c) Press the Menu Select button directly below
Cnts to view the required ID,
required ID, or use the keypad to enter the
required ID.
d) Press the PTT button to send the page.
The display shows Paging...<Number>.
If the call alert page is sent successfully, you
hear a tone and the display shows Ack
received. The radio returns to the Home
screen.
If the call alert page is not acknowledged, you
hear a low tone and the display shows No
acknowledge. Press the Menu Select button
directly below Ok to return to the main screen of
Contacts.
•
Sending a call alert page via the radio menu Call:
a)
or to Call.
b) Press the Menu Select button directly below
Call.
c) or to select the alias or ID, and press
the PTT button to initiate the call.
or to the
91
English