Maytag MAH8700AW series Service page 39

Disassembly Procedures
23.Set the tub on the floor. Position 4" wood blocks or
equivalent around the spinner shaft. Roll the tub to
the upright position and rest it on the blocks.
.
24.Remove the 10mm screws around the perimeter of
the tub.
©2005 Maytag Services
Downloaded from www.Manualslib.com
!
WARNING
manuals search engine
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
NOTE: Torque tub bolts to 6-11 ft. lbs.
25.Separate the front and rear halves of the Outer Tub.
26.Tub Gasket can be replaced after tub halves are split.
16026126 Rev. 0 39