Page 2
General Dash Cam Overview: 1) Up button 2) Menu button 3) Down button 4) USB data interface 5)HDMI Slot 6) Power button7)MicroTF/Memory card slot 8) HOLD/Lock (SOS) button9) Mode selection button10) OK/Confirm button 11) IR LED Light 12) Speaker 13) Reset button Description of Function Keys: 1) Up button: While in Standby mode (camera is on but not recording), use this button to zoom while recording.
Special Function Description 1. The G-sensor function: When the gravity acceleration up to 6g (1g = 9.80 m / sec 2), the machine will automatically protect the current video file where the acceleration was detected. The continuous loop recording will not delete this video file where the g-sensor activated and protected that file.
Battery Charging Instructions There are three ways to charge the battery, the red charging indicator light will be lit in the charging process, the charging time is about 180 minutes, the red charging indicator light will automatically switch off after the charging is finished. 1)Use the power adapter to charge 2)Use the PC-USB cable 3)Use the vehicle power charger Specifications Product Name...
Note: Using this product improperly can cause it to crash. In the phenomenon of it crashing, you can disconnect the battery or press the Reset button before turning on power to return it to normal. Package list Falcon 1080P Dash Cam USB Charging/Data Line DC Mobile Charger ...
Page 6
Falcon Electronics Limited Warranty What warranty covers: Manufacturer warrants to the original purchaser that the product furnished hereunder shall be free from defects in material and workmanship under normal use and service. In the event of any defect in material or workmanship, the Manufacturer will for twelve (12) months from the date of delivery of the product to purchaser, F.O.B.
Need help?
Do you have a question about the 2FE1080PEECAM and is the answer not in the manual?
Questions and answers